This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

c-3 spindle question

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Rob in NH
10+ Years
10+ Years
Posts: 2729
Joined: Sun Oct 03, 2004 7:11 am
Zip Code: 03848
eBay ID: panelbeata
Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub
Circle of Safety: Y
Location: NH, Kingston
Contact:

c-3 spindle question

Postby Rob in NH » Wed Nov 21, 2012 8:08 pm

i had to take the pulley off the center spindle and forgot that the center sheave is split, are these still available? Image
Image

SPONSOR AD

Sponsor



Sponsor
 

tst
10+ Years
10+ Years
Posts: 5189
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: c-3 spindle question

Postby tst » Wed Nov 21, 2012 8:27 pm

Hi Rob, yes they are available through the dealers, also I see Hamiliton Bob now has repops for these
Tim

Rob in NH
10+ Years
10+ Years
Posts: 2729
Joined: Sun Oct 03, 2004 7:11 am
Zip Code: 03848
eBay ID: panelbeata
Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub
Circle of Safety: Y
Location: NH, Kingston
Contact:

Re: c-3 spindle question

Postby Rob in NH » Wed Nov 21, 2012 9:27 pm

thanks tim, now my next question,the reason why i took it off was because of the bearings have gone bad, would anyone have the numbers for the bearings and seals?
Image

lombard
10+ Years
10+ Years
Posts: 228
Joined: Sat May 03, 2008 3:26 pm

Re: c-3 spindle question

Postby lombard » Wed Nov 21, 2012 9:56 pm

BOB IN N.H.

WHEN YOU START TO PUT IT BASK TOGETHER BE SURE THE TOP SEAL HOLDS
GREASE IN BOTTOM SEAL HOLDS DIRT OUT AND LETS GREASE OUT--------FILL IT
FULL OF GREASE WHEN PUTTING IT BACK-------WITH ONLY ONE GREASE FITTING
TO WORK GREASE THROUGH TO BOTTOM BEARING-----YOU CAN STILL USE THE
SPLIT HUB AS LONG AS YOU HAVE A BOLT IN EACH PEACE----


GOOD LUCK
LOMBARD----SC---
MY $0.08---

User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: c-3 spindle question

Postby Buzzard Wing » Wed Nov 21, 2012 11:02 pm

You may be able to cross the bearings with the IH part numbers. I would guess that they are Timken tapered roller bearings with CR or National seals. The numbers may be on the parts.

Or just call C&G.

http://partstore.caseih.com/us/parts-se ... :mr02-1092
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: c-3 spindle question

Postby Buzzard Wing » Wed Nov 21, 2012 11:06 pm

Looks like my favorite parts guy already answered the question.... (found it searching for the IH seal part number)

viewtopic.php?f=1&t=16239
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

Rob in NH
10+ Years
10+ Years
Posts: 2729
Joined: Sun Oct 03, 2004 7:11 am
Zip Code: 03848
eBay ID: panelbeata
Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub
Circle of Safety: Y
Location: NH, Kingston
Contact:

Re: c-3 spindle question

Postby Rob in NH » Wed Nov 21, 2012 11:09 pm

thanks larry, thats what i needed
Image


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 30 guests