This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Towing In Gear?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 489
- Joined: Thu May 19, 2005 2:04 pm
- Zip Code: 35216
- Tractors Owned: 1947 Cub
1949 Cub
2011 JD X320 - Circle of Safety: Y
- Location: Birmingham Al/Bay Springs Ms.
Towing In Gear?
When I tow my Cub on a trailer, I usually put the lever in either 1st or reverse to help keep it from trying to roll. I just had a thought this afternoon - is this putting a strain on the transmission which might cause damage of some sort?
Since retirement, the things I miss most are the holidays!
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Towing In Gear?
No more strain than if you parked it on a hill in gear. You will be okay. I usually put mine in neutral when tightening the binders and then kick it in gear after it is secured.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- clodhopper
- 10+ Years
- Posts: 807
- Joined: Sat May 07, 2011 8:20 pm
- Zip Code: 27526
- Tractors Owned: 1950 Cub Demo
1978 Cub Cadet 1650
cub 193 plow
cub 174 planter
cub sidedresser
cub 144 cultivator
cadet 50C deck - Circle of Safety: Y
Re: Towing In Gear?
Barnyard wrote:No more strain than if you parked it on a hill in gear. You will be okay. I usually put mine in neutral when tightening the binders and then kick it in gear after it is secured.
Use the gears as a "backup" ( oh S@#*, the strap broke!)
-
- Team Cub Mentor
- Posts: 5634
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Towing In Gear?
I always put them in low or reverse, it won't hurt anything. As Clodhopper said, a safety back-up.
- Tezell
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
- Contact:
Re: Towing In Gear?
I transport mine in gear also. It doesn't hurt anything.
Just as a reminder, make sure you "shake hands" with your tractor before you start it.
My Dad forgot to last spring and his 51 started and unloaded its self.....scared the crap out of me.
Just as a reminder, make sure you "shake hands" with your tractor before you start it.
My Dad forgot to last spring and his 51 started and unloaded its self.....scared the crap out of me.
"I ain't believing this!"
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Towing In Gear?
If you use heavy duty tow straps tightened in four directions, the transmission will not get any stress unless one loosens.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Denny Clayton
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: Towing In Gear?
Tezell wrote:I transport mine in gear also. It doesn't hurt anything.
Just as a reminder, make sure you "shake hands" with your tractor before you start it.
My Dad forgot to last spring and his 51 started and unloaded its self.....scared the crap out of me.
Maybe I tend to overthink it, but if pulled on I put it in reverse and if backed on I put it in first. I'd just rather it unloaded itself off the back rather than the front. Never been an issue yet, but just in case..........
- Tezell
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
- Contact:
- AL Farmall Boy
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Towing In Gear?
Thats the way we do ours too. Just as a backup of course
[quote="Denny Clayton] Maybe I tend to overthink it, but if pulled on I put it in reverse and if backed on I put it in first. I'd just rather it unloaded itself off the back rather than the front. Never been an issue yet, but just in case.......... [/quote]
[quote="Denny Clayton] Maybe I tend to overthink it, but if pulled on I put it in reverse and if backed on I put it in first. I'd just rather it unloaded itself off the back rather than the front. Never been an issue yet, but just in case.......... [/quote]
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 438
- Joined: Tue Aug 07, 2012 1:37 am
- Zip Code: 44134
- Tractors Owned: 1949 & 1951 Farmall Cubs
Several Snapper Garden Tractors - Circle of Safety: Y
- Location: Southern Suburbs of Cleveland, Ohio
Re: Towing In Gear?
The maximum amount of torque/stress/power/pressure exerted to the driveline occurs when the tractor is quickly set into motion with rapid clutch engagement, second only to when in motion and loaded down to peak torque.
With the engine stopped and placed in gear, virtually no power is transmitted. The only driveline pressure realized is what is needed to hold the tractor stationary which is minimal and cushioned by rotation of the engine if necessary.
Engineering exceeds minimal clutch and driveline component size dimensions to preserve the drive train against an occasional shock load from side-stepping the clutch.
A tractor transported a hundred thousand miles on a flatbed, unsecured with no chains and left in gear would probably only leave wear marks on the gears if they were coated with prussian blue beforehand.
With the engine stopped and placed in gear, virtually no power is transmitted. The only driveline pressure realized is what is needed to hold the tractor stationary which is minimal and cushioned by rotation of the engine if necessary.
Engineering exceeds minimal clutch and driveline component size dimensions to preserve the drive train against an occasional shock load from side-stepping the clutch.
A tractor transported a hundred thousand miles on a flatbed, unsecured with no chains and left in gear would probably only leave wear marks on the gears if they were coated with prussian blue beforehand.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Who is online
Users browsing this forum: No registered users and 53 guests