Rob in NH wrote:use a pair of vice grips made for sheet metal, they have a wide flat jaw.
How to Reupholster a Seat
Moderator: Team Cub
35 posts
• Page 3 of 3 • 1, 2, 3
Re: How to Reupholster a Seat
by AL Farmall Boy » Tue Nov 13, 2012 9:46 pm
I will have to check those out!
- AL Farmall Boy
- 501 Club
- Posts: 972
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35111
Re: How to Reupholster a Seat
by Stanton » Wed Nov 14, 2012 7:28 am
Sorry to hear you ran into some problems getting the lip open. I don't know if the sheet metal used on the later Cubs (a '75, like yours) and the earlier Cubs (a '47, like mine) were different gauges or not.
All I used was what you were using; or similar. Bascially, anything that I could use as a tool to pry the lip open. Don't know if I'd use heat or not.
Wish you success.
All I used was what you were using; or similar. Bascially, anything that I could use as a tool to pry the lip open. Don't know if I'd use heat or not.
Wish you success.
Stanton
-
Stanton - 501 Club
- Posts: 1608
- Joined: Mon Jun 22, 2009 6:56 am
- Location: Lone Jack, MO
- Zip Code: 64070
- Tractors Owned: 1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
1949 Farmall Cub, serial #65937
Cub-54 Blade
Cub-193 Moldboard Plow
Cub No. 23-A Tractor Disc Harrow
Grosshart Post Hole Digger
Prewitt Conversion Unit 
- Circle of Safety: Y
Re: How to Reupholster a Seat
by Rob in NH » Wed Nov 14, 2012 8:49 am
forgot to mention the vice grips wont work to open the lip, just to close it up.
- Rob in NH
- 501 Club
- Posts: 1750
- Joined: Sun Oct 03, 2004 7:11 am
- Location: NH, Kingston
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1966 cub
1948 cub
1957 cub
Re: How to Reupholster a Seat
by Steve K. CALIF » Wed Nov 14, 2012 5:15 pm
Great effort and a beautiful outcome! Steve K.
- Steve K. CALIF
- Cub Star!!
- Posts: 329
- Joined: Mon Feb 03, 2003 1:05 pm
- Location: Madera, CA.
- Zip Code: 93636
- Tractors Owned: 1947 Cub #550
1962 LoBoy - Circle of Safety: Y
Re: How to Reupholster a Seat
by Dusty B » Sat Nov 17, 2012 9:05 am
Great job! Congratulations! Also some improved techniques over mine that would give better results. Couldn't talk my wife into helping - that is definitely a big help having an extra set of hands! Dusty B
Grandpa's '41 B
'56,,'57,'59,'71 Cub
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'48 DeSoto
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59,'71 Cub
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'48 DeSoto
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
-
Dusty B - 501 Club
- Posts: 1183
- Joined: Wed May 23, 2007 7:35 am
- Location: IL, Downs
- Zip Code: 61736
- Tractors Owned: '45 SC Case
Fairbanks-Morse Generator - Circle of Safety: Y
35 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: Arthur Luke, Kirk-NJ, Majestic-12 [Bot], Super A, tractorpoor and 2 guests
|
|