Thu Nov 15, 2012 6:06 pm
I am going to build a small loader for my 154. Has anyone got one and can I run the hydraulics off of the tractor hyd. or off the pto? Didnt know if the tractor hyd would have oil enough or speed enough.
Thu Nov 15, 2012 7:10 pm
Most will tell you that the tractor hydraulics "will" operate the loader, but they have found that a remotely mounted/dedicated hydraulic pump will work faster and better. The tractor hydraulic pump is fairly small, and has a low volume, so it works rather slow.
Mon Nov 19, 2012 4:10 pm
I have a loader on my 154, uses the IHC belt drive pump. I have no idea the GPM of the pump but looks similar in size to a standard cub pump. I have also had a loader on an Fcub that had 2 inch cylinders and ran off the engine pump. Both go up and down about the same, not fast, but similar speeds.
Wed Nov 21, 2012 11:25 pm
i thank you. I have one that has three extra hydraulic connectors would be a shame not to use them.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.