I have the 383013R94 Wooster pump.
I bought it used to replace a worn out 360687R91 pump on my 130.
Started cleaning it up to paint today when I thought I should try to put it on the tractor first to see how it would fit.
It does not fit!!!!
Almost fits. Looks like I would have to use the die grinder to take a bit of meat off the 130 just above it under the dist. Only need about 1/16".
Everything I looked up before buying said it would fit.
What to do????
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hmmm Pump won't fit!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Hmmm Pump won't fit!
Just Do It !
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Hmmm Pump won't fit!
The book says it should fit. The problem is probably casting variation on the block. I'd probably apply the die grinder to the block as necessary to make it fit. Since you didn't show a picture, I reserve the right to change my suggestion.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: Hmmm Pump won't fit!
James,
Really just needed some confirmation again that this pump should fit.
I will take a before and after of the cast area and show the pump mounted on the tractor.
It is going to bolt up differently as well, but that all looks easy.
Thanks for the reply.
Ed
Really just needed some confirmation again that this pump should fit.
I will take a before and after of the cast area and show the pump mounted on the tractor.
It is going to bolt up differently as well, but that all looks easy.
Thanks for the reply.
Ed
Just Do It !
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Re: Hmmm Pump won't fit!
A little shave with the die grinder and the pump fits like a glove.
Thanks for nudge James.
Thanks for nudge James.
Just Do It !
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 16 guests