This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Powder Coat Curing Oven
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Thanks Rudi.....The prep wasn't any worse than for painting....except that I ran a torch over it to make sure I had all the grease and paint gone...I can't wait to get the big oven finished so I can do my rims and centers not to mention the mower deck....hope it fits!
After this trial run it makes me realize Powder Coating is the way to go if it is at all possible.......don't think I would attempt a Cub hood though.
After this trial run it makes me realize Powder Coating is the way to go if it is at all possible.......don't think I would attempt a Cub hood though.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
I managed to find this old double oven on Craigslist for $30 should work great for small-medium parts....I even think I could fit a front rim in there. Progress on the big oven has been slow....not enough funds. But I have manged to find all the parts....
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 370
- Joined: Sun Sep 21, 2008 9:12 pm
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
- Location: Dittmer, mo
Re: Powder Coat Curing Oven
Thats exactly how i started. Still use my double oven on occasio. I have been spraying alot of powder this week.so far i have done 419 parts and its only wendsday. Got a bunch more lined up to do. How did you clean the part you did?
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
I use a $20 sanblaster I bought from TSC and the black diamond 40 grit blasting sand (50 lbs for $8)....works pretty good but eventually I want to get a bigger air compressor and big sandblaster. But for now it does what i need to do....The mower deck will take a bit more so I might take it somewhere and pay someone to blast it for me.....might be cheaper that way. I just ordered 2 lbs of IH Red and 2 lbs of Anodized Aluminum from Columbia Coatings....that should arrive tomorrow....so next week I will be coating the front rims. I will post pics when I get them finished. I never would have thought that PC would be so easy...but it is...and it isn't hard to get really good results. I am definitely sold on PC.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 370
- Joined: Sun Sep 21, 2008 9:12 pm
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
- Location: Dittmer, mo
Re: Powder Coat Curing Oven
Its not that hard as long as you have enough space in an oven and the parts are clean. One thing i would suggust is to heat thr parts up to curing temperature to allow the parts to outgass any oils in the metal otherwise you may end up wwith small inperfections in the coating from oils soaked in the metal. I outgass every part i coat. I also use a product cslled prepall that columbia sells to help clean the metal. Just my .02
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
AH....I didn't understand what you meant by "Clean"....I use my torch (1 inch rosebud) to heat the part up to get rid of all surface oils and such.....so it is similar to what you are doing....except for the solution.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Well I recieved my powders from Columbia Coatings yesterday.....2 Lbs IH Red (http://www.columbiacoatings.com/category_s/102.htm) and 2 Lbs Anodized Aluminum (https://www.columbiacoatings.com/category_s/960.htm) for my rims....not a bad deal really 2lbs for about $20.
Now I have to get my 50 amp recepticle installed tonight and then I can build a rolling base for the double oven and after that I should have pictures of my rims to post.
CPIII
Now I have to get my 50 amp recepticle installed tonight and then I can build a rolling base for the double oven and after that I should have pictures of my rims to post.
CPIII
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Powder Coat Curing Oven
Charles:
I am really following this thread of yours. Had a chum come by yesterday, looking at my Cubs and remarking that I really should restore them all to their original glory. Keith also suggested that I should powder coat just about everything -- better than painting in his opinion So.... how big a cabinet does one have to be to powder coat a Cub
I am really following this thread of yours. Had a chum come by yesterday, looking at my Cubs and remarking that I really should restore them all to their original glory. Keith also suggested that I should powder coat just about everything -- better than painting in his opinion So.... how big a cabinet does one have to be to powder coat a Cub
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Hopefully a cub that is dismantled will fit in the oven I am building......not sure if I will ever get to that level but .......who knows....it is sort of contagious....powder coat one part....another...another...where will it stop...who knows.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Last night I was able to hook up my 240v 50 amp outlet and get my oven up and running. This is the first of IH Red that I have shot....turned out pretty good. Going to try an shoot some of the Anodized Aluminum powder this weekend.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Powder Coat Curing Oven
Starting to turn out real good. Thanks for sharing pictures/story on the powder coating process.
-
- 10+ Years
- Posts: 370
- Joined: Sun Sep 21, 2008 9:12 pm
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
- Location: Dittmer, mo
Re: Powder Coat Curing Oven
theoretically you can powder a whole cub. Just have to mask everything.remove any sign of grease.and remove all rubber and anything that will melt. The tin may be a little hard to do but can be done. If you need to fill any dents you would need high temp metal filler. My oven is big enoughand believe me im thinkingabout it.
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
After looking at how the final drive bull gear cover came out ...it sort of make the rest of it look bad.....Like I said no telling where I will stop...But a powder coated cub would sure look good.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Well I think I found a cheap easy powder coat booth for under $12. What do you guys think? Cut the front hole a bit bigger....close in the top.....A thin piece of Teflon on the bottom to collect re-use powder. The bar (And its conductive!) will hold most things I am going to coat.
http://www.uhaul.com/MovingSupplies/Box ... ox?id=6560
http://www.uhaul.com/MovingSupplies/Box ... ox?id=6560
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Powder Coat Curing Oven
Well I ended up not using the moving boxes for my PC booth...while at Home Depot I found a 4X8 sheet of 5mm (About 1/4") underlayment (What I call plywood) for $10 a sheet.... Since I would need two of the moving boxes ($10 each) the build my own option would require a bit more work but would be cheaper in the end. I will send picture of that when I can......
I also built a stand for my PC double oven this past weekend......it came out ok...I used ever bit of scrap steel I had laying around...don't laugh too hard.
The furniture dolly I purchased from TSC ($22) was cheaper than buying individual casters. The dolly is just for now though until I figure out a permanent place for the oven to stay,
I also built a stand for my PC double oven this past weekend......it came out ok...I used ever bit of scrap steel I had laying around...don't laugh too hard.
The furniture dolly I purchased from TSC ($22) was cheaper than buying individual casters. The dolly is just for now though until I figure out a permanent place for the oven to stay,
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
Who is online
Users browsing this forum: No registered users and 0 guests