Cubfest Northeast Projects

The new home for CubFest and Tractor show Announcements & Discussions.

Moderator: Team Cub

Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.

Re: Cubfest Northeast Projects

Postby CapeCodCubs » Fri Sep 21, 2012 9:08 pm

I would love to see if I can get my hydraulics working. Went through the pump several times and know that is not the issue. The TC just had the strainer replaced and looked really clean inside...not sure what is up with. And have some brakes to reline so will PM Bob to inquire about that.
.
Was bringing local cranberries up for Rudi, Pris and anyone else who might want a small sack of them from a friend's cranberry bog. :D
Image
CapeCodCubs
5+ Years
5+ Years
 
Posts: 2575
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
!950 F Cub Fast hitch

10 FastHitch implements
tons' of cultivating and planting stuff
Cub Middlebuster, Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Mott flail mower

Re: Cubfest Northeast Projects

Postby Bill Hudson » Tue Sep 25, 2012 3:37 pm

I've got four Woods 59 spindles that need to be rebuilt. I'm willing to do one, at least, to show folks how I do it.

Bill
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Bill Hudson
Team Cub
Team Cub
 
Posts: 6456
Joined: Wed Jul 26, 2006 10:50 am
Location: OH, Madison
Zip Code: 44057
Tractors Owned: :
57 F-Cub
64 Lo-Boy
68 Lo-Boy
52 F-Cub
Circle of Safety Award
Circle of Safety: Y

Re: Cubfest Northeast Projects

Postby Buzzard Wing » Wed Sep 26, 2012 8:20 am

Would anyone be interested in mowing a hayfield east of Cecil's?? If you have a Cub with a mower (and a trailer) it may be a nice Friday project, takes most of the day with a C-2 (42") but if we had a couple of Cubs it would be a great side project. I will check to see if any plowing etc is needed. Farm is owned by a good friend's daughter and son-in-law and they don't have a tractor (but do have a Gravely L).

I will probably drag along the right angle pulley off my Mott (bad front seal) and another one. Working on the parts list now.

Bill, I will surely watch your demo!
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 10057
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: Cubfest Northeast Projects

Postby Don McCombs » Wed Sep 26, 2012 11:45 am

Larry, do they want it cut to be baled or just mowed?
Don McCombs
MD, Deep Creek Lake

"1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
 
Posts: 10585
Joined: Mon Feb 03, 2003 6:45 am
Location: MD, Deep Creek Lake
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
1951 Farmall Super C w/FH
Circle of Safety Award
Circle of Safety: Y

Re: Cubfest Northeast Projects

Postby Buzzard Wing » Wed Sep 26, 2012 6:43 pm

Just cut.... don't know if we cut it if someone would bale it later?? Essentially they have had a guy with one of those green tractors rotary mow it for the last few years.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 10057
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: Cubfest Northeast Projects

Postby Bill Hudson » Mon Oct 08, 2012 3:41 pm

Bill Hudson wrote:I've got four Woods 59 spindles that need to be rebuilt. I'm willing to do one, at least, to show folks how I do it.

Bill


Folks,

I will not be doing the spindle rebuild. Too much going on and I failed to order parts. I'm sorry.

Bill
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Bill Hudson
Team Cub
Team Cub
 
Posts: 6456
Joined: Wed Jul 26, 2006 10:50 am
Location: OH, Madison
Zip Code: 44057
Tractors Owned: :
57 F-Cub
64 Lo-Boy
68 Lo-Boy
52 F-Cub
Circle of Safety Award
Circle of Safety: Y

Re: Cubfest Northeast Projects

Postby spaceghost » Tue Oct 09, 2012 3:02 pm

I am going to bring the 1963 F cub that I bought in NH this past summer. I have a short some where, the battery goes dead if you leave the cables on. I had the genorator rebuilt.
Also the TC is leaking and I am going to replace some gaskets and see if that fixes the problem.
Good judgment comes from experience, and experience comes from poor judgment.

1959 LO-Boy 1950 Super A
User avatar
spaceghost
10+ Years
10+ Years
 
Posts: 737
Joined: Wed Jun 23, 2004 8:19 am
Location: Middleboro MA usa
Zip Code: 02346
Tractors Owned: 1959 Cub lo-boy
1950 super A

Re: Cubfest Northeast Projects

Postby Cecil » Tue Oct 09, 2012 4:41 pm

You might have a bad voltage regulator.
Cecil
Team Cub Mentor
Team Cub Mentor
 
Posts: 3696
Joined: Tue Jan 11, 2005 12:12 pm
Location: Kinderhook, NY
Zip Code: 12184
eBay ID: adak8965
Circle of Safety Award
Circle of Safety: Y

Re: Cubfest Northeast Projects

Postby Buzzard Wing » Tue Oct 09, 2012 5:46 pm

Turns out the farm could use mowing AND plowing..... Thinking it would be best either Friday or Sunday. It's about 20 minutes away.

I may replace the bushing in the fast hitch C-2 mower spindle pulley. All depends on if it shows up in time.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 10057
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: Cubfest Northeast Projects

Postby Rudi » Tue Oct 09, 2012 6:12 pm

Larry:

Buzzard Wing wrote:I may replace the bushing in the fast hitch C-2 mower spindle pulley. All depends on if it shows up in time.


I would want in on that one -- interesting project.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28511
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Previous

Return to CubFest and Tractor Show Announcements & Discussions

Who is online

Users browsing this forum: No registered users and 2 guests