This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Belt Pulley Gear Box Rebuild

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: Belt Pulley Gear Box Rebuild

Postby Buzzard Wing » Thu Sep 27, 2012 8:47 am

I poked at my 'bag' of PTO pulley stuff and found that Jeff in Ohio did send me two O rings... so we have that covered. Also found it to be an ugly, rusty mess. At least externally. Not real fond of running something like that through a sandblast cabinet, but if the gear box is empty I can hopefully clean it up enough. (got a couple of bags of black beauty for Cecil's cabinet too.)

Rudi, I may try to source the 6205-J locally. But be very careful what you get, possibly a 6205-JEM would work (EM = electric motor). I will get the 'center' bearing from a dealer, 351274R91 it is not something I will risk a 'good enough' fit to save a couple of bucks. They are $26.

The KOYO/Torrington B-1210-OH bearing goes in the TRANSMISSION. (soon I hope)

The gasket, center bearing, plug (16-684R1) and HyTran will come from a dealer.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Belt Pulley Gear Box Rebuild

Postby Rudi » Thu Sep 27, 2012 9:32 pm

Larry:

Ok, I just checked with Messicks. None in stock but available. I wonder if Columbia has them in stock. If so that might be an option for me. Will know in a bit.

And I will pay attention to the 6205J. Question -- if I cannot get the J, do I try the Timken 205BB ?
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: Belt Pulley Gear Box Rebuild

Postby Buzzard Wing » Thu Sep 27, 2012 10:42 pm

Since I had it on the bench, I took it apart.... almost. Enough to get the get the 'mystery' bearing out. It is marked 'Hyatt 1204T' and runs directly on the shaft (no inner race, roller bearing). Hyatt is long gone and not sure about NHD (New Departure/Hyatt). Bigger project than I hoped. Still having trouble with the PTO end, but got Mr Kroil on the job.

Can't expect a dealer to stock everything, Ken at C&G told me that if it's in the warehouse he will have it before the store opens in the morning. As for the 6205, the ST 225B (superseded by 210041) is available from a dealer or TM.

In my experience, you won't save much or pay more getting bearings or seals elsewhere and risk getting the wrong thing.

I have everything I need to put my long stripe tranny back together.... I guess the only reason I am fooling with the belt pulley is I am tired of the Mott leaking on my driveway :roll: Mushrooms at every turn.

I would recommend you start taking it apart now.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Belt Pulley Gear Box Rebuild

Postby Rudi » Thu Sep 27, 2012 11:13 pm

Larry:

I am working on getting it apart now. Dunk tank is almost full.

I cannot find the ST 225B/210041 bearing on TM's site. I know I am missing something but whatever it is, it is beyond me tonight ...

Does this look like the bearing you took out?

Image
Image
Hyatt 1204T Radial Bearing

Seems it is out of stock as well. Not sure what condition mine is in... I guess I need to take it apart in the next couple days or so. Gonna keep checking on the bearings.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: Belt Pulley Gear Box Rebuild

Postby Buzzard Wing » Fri Sep 28, 2012 8:37 am

Yep, that's it.

Don't make it harder than it is... order the Hyatt, ST 225B's (6205), gasket and the seal that is still available (#34) from Columbia and have it waiting for you. Also, Hy Tran.

The other seal (#44) is on Amazon for $8.66 and I will get mine there as soon as I figure out what will make $25 for free shipping.

ST 225B is the 6205-J, it is the same bearing as the PTO shaft. Check the back of the parts book (index by part number).
http://www.tmtractor.com/new/pt/155fp.htm

There are THREE in this picture:
http://www.farmallcub.info/tc37f_db/tc3 ... 007-14.jpg
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: Belt Pulley Gear Box Rebuild

Postby Buzzard Wing » Fri Sep 28, 2012 6:06 pm

Update on #37 351 274 R91.... it is no longer available in the CNH supply chain! The one I pulled out actually looks decent enough to use and I am very particular about bearings.

I will continue to look, because I want to rebuild the one on the FH Mott on the Lo Boy, that one always seems to have water in it, bad for bearings.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Belt Pulley Gear Box Rebuild

Postby Rudi » Fri Sep 28, 2012 10:30 pm

Larry:

Ok, I kinda think I got this .... I think. Come Monday I will get all my ducks in a row, get the rest of the stuff I need. Cecil has taken care of the gaskets. I am going to order the stuff from Columbia and have it held for Cecil. Hopefully I will get everything correct. Will let you know what I find.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Cecil
Team Cub Mentor
Team Cub Mentor
Posts: 4127
Joined: Tue Jan 11, 2005 12:12 pm
Zip Code: 13830
eBay ID: adak8965
Circle of Safety: Y
Location: Oxford, NY

Re: Belt Pulley Gear Box Rebuild

Postby Cecil » Sat Sep 29, 2012 4:58 am

Rudi, order the gaskets also so I get everything at once and don't forget them.

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Belt Pulley Gear Box Rebuild

Postby Rudi » Sat Sep 29, 2012 3:42 pm

Cecil:

The on-line request has been submitted. I guess I will know Monday????
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Belt Pulley Gear Box Rebuild

Postby Rudi » Tue Oct 02, 2012 12:33 pm

I talked to Mike Albrecht at Columbia -- nice guy, helpful etc., good to deal with. Unfortunately not all is currently available but hopefully will be there Thursday afternoon. Road trip :D to Columbia.

Seems Gaskets are NLA in the CaseIH Parts stream and ... big surprise neither is the 351 274 R91 bearing. This is the Hyatt 1204T IIUC from Larry's posts.. Mike is going to see if he can find a substitute for the Hyatt. If mine is still good, that is fine, and if he finds the bearing then I will have extra parts :{_}: cause I have a few more Belt Pulley Gear Boxes :wink:

He thinks we may have to make the gasket -- so I am wondering what thickness gasket material do we need. I kinda think it is 1/16th or so cork, am I in the ball park or a bit thick/thin???
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Bob McCarty
Team Cub
Team Cub
Posts: 11825
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Belt Pulley Gear Box Rebuild

Postby Bob McCarty » Tue Oct 02, 2012 3:54 pm

Rudi, I think that is a "paper" gasket, so the cork would be too thick.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

Cecil
Team Cub Mentor
Team Cub Mentor
Posts: 4127
Joined: Tue Jan 11, 2005 12:12 pm
Zip Code: 13830
eBay ID: adak8965
Circle of Safety: Y
Location: Oxford, NY

Re: Belt Pulley Gear Box Rebuild

Postby Cecil » Tue Oct 02, 2012 4:56 pm

I have gasket material here.

ntrenn
10+ Years
10+ Years
Posts: 804
Joined: Tue Apr 17, 2012 7:55 pm
Zip Code: 47119
Skype Name: ntrenn
Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession
Circle of Safety: Y
Location: Indiana

Re: Belt Pulley Gear Box Rebuild

Postby ntrenn » Tue Oct 02, 2012 4:58 pm

The hyatt 1206 for the rear countershaft crosses to an SKF nu206.
Using that logic, the 1201 crosses to a nu201, which shows up here:
http://www.consbrgs.com/page.taf?detail=158_1_2

with dimensions of 32 mm OD, 17 mm inside rollers, 12 mm inner ring ID and 10 mm wide. How close is that?

User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10540
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: Belt Pulley Gear Box Rebuild

Postby Buzzard Wing » Tue Oct 02, 2012 7:47 pm

Rudi, guess you missed my post about that bearing being NLA??

I figure it's better to juggle 3 Cub projects, so I thought I would swap the spindle on the fast hitch C-2 (heats up the belt, bad!). You know, an hour project that turns into a mushroom farm. Wrong time of year to fool with a mower, but I did have a spare spindle. Have a new spindle pulley bushing on order from C&G along with the seal that is still available for the right angle pulley (#34-- 19857D). I also ordered 4 - ST 225 B (new number now) bearings. I guess he will just skip the gasket, cause that was in the mix too.

I may reuse the old gasket with my new favorite stuff, Hylomar. Or just Hylomar, it seems to be great stuff. Still waiting to see how well it holds up on the the engine (oil pan, front cover etc).

I think the bearing is 30mm x 45mm 13mm wide. Bermuda Ken gave me some cross references GM 7453824 (no luck) and a few today that I have not tried to track down yet, Caterpillar 1M6847 and 4F4061, Bower HM1204EL and Nice 1204T.

No wonder that thing has been sitting in a bag since I went to your Cub fest....
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Belt Pulley Gear Box Rebuild

Postby Rudi » Tue Oct 02, 2012 7:49 pm

Ok.. I guess I messed up the number. Hyatt 1204T ... using ntrenn's logic I am searching for an skf nu1204 and see what that looks like.

What I found on the SKF site was a 1204EKTN9 .. have no clue if this is the right one or not -- here is the link for those who understand this a whole lot better than me...

Self-aligning ball bearings, cylindrical and tapered bore

Found this one on :eBay: SKF 1204 ETN9 Radial Self-Align Ball Bearing 20mm NEW

Image

As you can see it says 1204 E on the outer bearing cage.

The Hyatt in the previous post is out of stock. Most of the Hyatt 1204's are out of stock....

If others more knowledgeable can confirm that this bearing would be the one we need, then I can pass it along to Mike and see if he can get em in time, if not then I can get this one maybe.

Cecil:

Okay on the gasket material.

Bob:

Ok.. the seals as requested are in the total amount I have on order.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship



Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 21 guests