I have one of those questions that probrally has a obvious answer But I haven't found it yet ,,, I always see the Short front tool bars for sale and they are 99% of the time for the same side ,, so what is the deal with them ?? I also got a set when I bought my cub (both for the right side ) and got me to looking for a left one , that's when I figured out there must be some application for them being the same ,, can somebody please enlighten me on this ?,, thanks in advance ,,,
Also could somebody tell me what size sprocket should be on a counter shaft for driving a sidedresser ? I bought a planter, sidedresser a few weeks ago and looking at the manuals , it looks like the outside sprocket is a little smaller than the inside (the one that drive the planter) but mine are the same size ,,? What is the result ? More fertilizer ? Less fetilizer ? Thanks for any help ,,
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Short front tool bars
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 15
- Joined: Tue May 15, 2012 6:46 pm
- Zip Code: 75948
-
- 10+ Years
Re: Short front tool bars
the short toolbar is for th SA-140 tractors cultivators I believe. Others are better informed.
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Short front tool bars
The "short" tool bars are used on the SA-140 series highcrops for rear tire clearance.
As for the reason why you ended up with two, I don't know. All the ones I've seen have been matching pairs.
As for the reason why you ended up with two, I don't know. All the ones I've seen have been matching pairs.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Short front tool bars
The short front tool bars were on the early SAs and they both look the same The newer ones are like the 140s They were an option on SAs I think I do not like them as they limit what you can do in the way of mounting the shanks I am not sure what screwstick is talking about, but It is not the tool bars that I think you are referring too. As to the size of the sprockets there were many different combinations that could be had by changing the sprockets more to do with seed spacing. The type of star wheel in the hopper controls the amount of fertilizer that you put down .
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 4436
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Short front tool bars
I'll defer to David about the tool bars. He's been around these things much more than me!
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Short front tool bars
They are for the A-144 (Super A) cultivator with the 4 sweep front section. The left and right bars are identical. Check the manuals linked above:
http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php?dirpath=./files/Cultivator%20parts&order=0
Download the PDF on this page then scroll down to page L-18.
http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php?dirpath=./files/Cultivator%20parts&order=0
Download the PDF on this page then scroll down to page L-18.
-
- 10+ Years
- Posts: 15
- Joined: Tue May 15, 2012 6:46 pm
- Zip Code: 75948
Re: Short front tool bars
Thanks for all the info fellers, I knew I could get a educated answer ,, Sounds like they need to head to eBay ! They were just extra parts I got with the deal ,, really just wondering for curosity sake ,,, as for the sprockets on the planter drive , they will probrally be fine , just need to set it all up and see how It works and go from there , it was supposedly used to plant corn just like it sets , just wanted to get all my ducks in a row before I started planting next spring , and try to get anything I may need between now and then ,, thanks again for the info ,,
-
- 10+ Years
- Posts: 5238
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Re: Short front tool bars
The Super A/100/140 cultivator is not perfectly centered on the tractor. The two "short" bars are the same to accomplish "centering" your tools on the cultivator. If you examine any of the toolbars closely, they are made to sort of shift everything to the right. The "long" ones have a different bend for the LH bar verses the right. I prefer the two "short" bars for most of what I do. The long ones are in the way sometimes.
Al
Al
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Shop Made DIY Disc Hiller Mid Mount Tool Bar
by southern-jim » Thu Mar 30, 2023 12:43 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 516
-
by workinonit
Wed May 17, 2023 9:57 am
-
-
-
Front PTO for 130/140
by inairam » Mon Jun 07, 2021 6:45 am » in Farmall A, Super A, AV, 100, 130 & 140 - 3
- 368
-
by tst
Sun Jun 13, 2021 9:44 am
-
-
-
Front Hydrolics pump Attachment(s)
by inairam » Fri Oct 15, 2021 1:01 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 177
-
by inairam
Sun Oct 17, 2021 9:01 pm
-
-
- 2
- 229
-
by SamsFarm
Mon Mar 14, 2022 1:22 pm
-
-
Farmall 140 Front reservoir Attachment(s)
by Rob8423 » Thu Feb 03, 2022 9:13 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 346
-
by SamsFarm
Sat Feb 05, 2022 12:47 am
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 0 guests