This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

PTO Drive Pully for bar sicle mower

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
washbb
10+ Years
10+ Years
Posts: 40
Joined: Tue Nov 10, 2009 12:50 pm
Zip Code: 52302

PTO Drive Pully for bar sicle mower

Postby washbb » Tue Sep 11, 2012 8:59 pm

I am working on getting my bar mower installed and working before I lose all the parts. I have it all mounted and pretty much figured out except the rear drive pulley seems to be very tight on the PTO shaft. I will probably have to put it on with a hammer which assures I will need a puller every time I take it off. That does not seem correct to me. So I thought I would ask here and see if anybody else has had this issue. Thanks.-Phil

SPONSOR AD

Sponsor



Sponsor
 

outdoors4evr
10+ Years
10+ Years
Posts: 2784
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: PTO Drive Pully for bar sicle mower

Postby outdoors4evr » Wed Sep 12, 2012 7:33 am

What tractor are you putting this on and what model of sicle bar mower are you installing?
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade

washbb
10+ Years
10+ Years
Posts: 40
Joined: Tue Nov 10, 2009 12:50 pm
Zip Code: 52302

Re: PTO Drive Pully for bar sicle mower

Postby washbb » Wed Sep 12, 2012 5:14 pm

Am mounting a 22 series mower on a 154 Lowboy have everything mounted still working on the bar height adjustment stuff. Just seems rear PTO pulley will have to be tapped on. May just be tight as I don't think this was ever used much.

User avatar
Denny Clayton
10+ Years
10+ Years
Posts: 4565
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: PTO Drive Pully for bar sicle mower

Postby Denny Clayton » Wed Sep 12, 2012 8:41 pm

Be sure to clean the splines on both the pto shaft and the pulley.
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty" (CubTug winner 2007 & 2009)
Image
Member of Ohio Chapter 6
Circle of Safety

User avatar
RaymondDurban
Cub Pro
Cub Pro
Posts: 4435
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: PTO Drive Pully for bar sicle mower

Postby RaymondDurban » Wed Sep 12, 2012 8:49 pm

washbb wrote:Am mounting a 22 series mower on a 154 Lowboy ....

Do you have a model 222 mower, or a L-22? The PTO pulley is the same, but the brackets and design are different.
As Denny said , clean the splines on the PTO and the pulley. If its still tight, you might try to open up the pulley a bit with a small chisel with the bolt loose.

washbb
10+ Years
10+ Years
Posts: 40
Joined: Tue Nov 10, 2009 12:50 pm
Zip Code: 52302

Re: PTO Drive Pully for bar sicle mower

Postby washbb » Fri Sep 14, 2012 8:44 pm

Got it on getting ready to try out thanks.


Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 2 guests