Tue Jul 05, 2011 10:42 pm
I came home today with a farmall B high crop that I aquired a while ago. It is pretty rough, but looks really cool. The engine serial # puts it at a 1940 model, #28xxx about 20,000 in a run of about 35,000
I traded for it, 'cause I think it looks cool, and the deal was right. I am curious about the rear wheels. I believe they were F12, 14 or 20 steel wheels that were converted to take a 38" rim for a rubber tire. The tractor is a bit rough, no tins, motor stuck, but I took a gamble that the rims were where the value in it was.
Can anyone tell me if or what the value of this type of rim is? The tractor is for sale if anyone would like to make an offer.
Here are some pics.
Wed Jul 13, 2011 9:52 pm
That is one INTERESTING home made job there!
Thu Jul 14, 2011 10:13 pm
Very interesting! Kinda looks like one of those huge 1890's bikes with the large wheel on the front. Like a tractor on stilts!!
Mike in La Crosse, WI
Wed Aug 08, 2012 3:46 pm
they look like typical cutoffs from an F series. i never measured the bolt pattern to sse if they would fit on a letter series tractor - interesting. cutoffs are not in much demand. F & H round spokes bring more if they are not rotted out.
Wed Aug 08, 2012 5:12 pm
Art I would love to find an old A or B motor, and a set of usable tires, just to drive it around at shows. Would also need some very rusty tins.
Wed Aug 08, 2012 5:52 pm
i got to thinkin. our F12 has adjustable axles which makes me think the F20 was the same. so smeone must have used A/B centers to make those? or W series rims, perhaps. we've got a 1020 carcass out at the farm, i'll have to look at the rear end.
Wed Aug 08, 2012 8:46 pm
I will take a close up of the inner rim for you Art, if that will help.
Thu Aug 09, 2012 8:47 am
i'd like to see it, thanks
Wed Aug 15, 2012 11:25 am
Art, here are a couple pics of the hub
You do not have the required permissions to view the files attached to this post.
Wed Aug 15, 2012 10:27 pm
Those wheels remind me of my late Uncle's H that was bought on steel and later converted to rubber.
Thu Aug 16, 2012 1:00 pm
danovercash wrote:Those wheels remind me of my late Uncle's H that was bought on steel and later converted to rubber.
I always liked the looks of the H cutoffs, but there is no way to put weights on them.
Thu Aug 16, 2012 7:14 pm
Perhaps they were trying to get this?
Found on Chat Tractors site
Fri Aug 17, 2012 6:54 am
Went to their site and watched the video "Three tractors that were never made", very interesting!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.