This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
FEL , Super A
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 133
- Joined: Fri Sep 02, 2011 6:22 pm
- Zip Code: 33876
FEL , Super A
Got it working pretty good, but taken before additional reservoir added. Thanks to Jim Becker for advice & suggestions.
- Mr Joshua
- 10+ Years
- Posts: 370
- Joined: Sun Sep 21, 2008 9:12 pm
- Zip Code: 63023
- Tractors Owned: 1955 Farmall Cub
1951 Super A
1945 A - Circle of Safety: Y
- Location: Dittmer, mo
- Contact:
Re: FEL , Super A
Wow that's what I want!!
Mr. Joshua
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
74 VW super beetle (o\ /o)
1955 cub
1951 Super A
1945 A
and any of TC's toys
- Tezell
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
- Contact:
-
- 10+ Years
- Posts: 133
- Joined: Fri Sep 02, 2011 6:22 pm
- Zip Code: 33876
Re: FEL , Super A
Thanks,
It is a modified loader made by Brantley Mfg. Co . of Frederick, OK. The hoses were shot, but no welds and the clyinders were good. This is what it looked like "before"
It is a modified loader made by Brantley Mfg. Co . of Frederick, OK. The hoses were shot, but no welds and the clyinders were good. This is what it looked like "before"
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Re: FEL , Super A
Looks great but just a suggestion... More bracing.
Right now that is putting almost all the force on the bell housing. I would run braces from the tops of the towers down to the front cultivator mount at least, and maybe two more from the tops of the towers down to the finals. The low braces are a good start but frankly it needs more.
Right now that is putting almost all the force on the bell housing. I would run braces from the tops of the towers down to the front cultivator mount at least, and maybe two more from the tops of the towers down to the finals. The low braces are a good start but frankly it needs more.
-
- 10+ Years
- Posts: 133
- Joined: Fri Sep 02, 2011 6:22 pm
- Zip Code: 33876
Re: FEL , Super A
Thanks Matt, something to think about. It doesn't do a lot of work, in fact the relief bypass settingis pretty low right now, just haven't gotten into setting the pressure up some.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 12 guests