This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

130 Axle Pivot Bushings.

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

130 Axle Pivot Bushings.

Postby EZ » Wed Jul 11, 2012 6:10 pm

Just got my quote back from CaseIH for those pivot bushings.

$70Cdn, ea. 'Ouch'!

I will be looking around to see if I can cross them and get them cheaper.
Just Do It !

SPONSOR AD

Sponsor



Sponsor
 

User avatar
cowboy
10+ Years
10+ Years
Posts: 3414
Joined: Sat May 15, 2004 11:10 am
Zip Code: 49229
Location: MI, Britton

Re: 130 Axle Pivot Bushings.

Postby cowboy » Fri Jul 13, 2012 8:28 am

Ouch it would be cheaper to get a piece of brass and have someone turn them out on a lathe!

Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.

"Those that say it can’t be done should not interrupt the ones who are doing it.”

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Fri Jul 13, 2012 9:05 am

Billy,
That's what I am thinking at this point.
I saw the specs for those bushings on here the other day, but now I cannot find them.
I'm gonna need the outside and inside size numbers for the 2 pivots, and the 4 knuckle bushings.

Someone suggested using steel, but I'm thinking rust will not be friends with an axle pivot over time.
Just Do It !

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Fri Jul 13, 2012 9:40 am

The knuckle bushings 356609R1 are available at Worthington AG (halfway between Flint and Grand Rapids.) for $11.81ea. which is not bad seeing CaseIH wants $35ea.

The pivot bushing 43455DR are not available there, or at I&T.

the quest continues.
Just Do It !

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Fri Jul 13, 2012 11:35 am

Image

Duhh.
Just Do It !

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Wed Jul 18, 2012 4:55 pm

Wow...sometimes you win.
A buddy sent me an email yesterday asking me my mailing address.
Sending me a new set of pivot bushings.........no charge!

How awesome is that?
Just Do It !

User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: 130 Axle Pivot Bushings.

Postby Bus Driver » Tue Jul 24, 2012 10:22 am

In the absence of other information, the pin may help develop the dimensions. Measuring the pin diameter will establish the nominal original diameter and subtracting a couple of thousandths will give the bushing bore. The pin will show the length of the bushings by the wear pattern on the pin.
Luck favors those who are prepared

User avatar
EZ
10+ Years
10+ Years
Posts: 1185
Joined: Tue Feb 11, 2003 6:33 pm
Zip Code: P0M1Z0
Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Thu Aug 16, 2012 8:59 pm

Complimentary 43455DR Axle Pivot Bushings came in today.

They have a split in them. Does it matter where the split is oriented when it is installed?
Just Do It !


Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 5 guests