130 Axle Pivot Bushings.

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

130 Axle Pivot Bushings.

Postby EZ » Wed Jul 11, 2012 6:10 pm

Just got my quote back from CaseIH for those pivot bushings.

$70Cdn, ea. 'Ouch'!

I will be looking around to see if I can cross them and get them cheaper.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby cowboy » Fri Jul 13, 2012 8:28 am

Ouch it would be cheaper to get a piece of brass and have someone turn them out on a lathe!

Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.

"Those that say it can’t be done should not interrupt the ones who are doing it.”
User avatar
cowboy
Cub Pro
Cub Pro
 
Posts: 3414
Joined: Sat May 15, 2004 11:10 am
Location: MI, Britton
Zip Code: 49229

Re: 130 Axle Pivot Bushings.

Postby EZ » Fri Jul 13, 2012 9:05 am

Billy,
That's what I am thinking at this point.
I saw the specs for those bushings on here the other day, but now I cannot find them.
I'm gonna need the outside and inside size numbers for the 2 pivots, and the 4 knuckle bushings.

Someone suggested using steel, but I'm thinking rust will not be friends with an axle pivot over time.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Fri Jul 13, 2012 9:40 am

The knuckle bushings 356609R1 are available at Worthington AG (halfway between Flint and Grand Rapids.) for $11.81ea. which is not bad seeing CaseIH wants $35ea.

The pivot bushing 43455DR are not available there, or at I&T.

the quest continues.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Fri Jul 13, 2012 11:35 am

Image

Duhh.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby EZ » Wed Jul 18, 2012 4:55 pm

Wow...sometimes you win.
A buddy sent me an email yesterday asking me my mailing address.
Sending me a new set of pivot bushings.........no charge!

How awesome is that?
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Re: 130 Axle Pivot Bushings.

Postby Bus Driver » Tue Jul 24, 2012 10:22 am

In the absence of other information, the pin may help develop the dimensions. Measuring the pin diameter will establish the nominal original diameter and subtracting a couple of thousandths will give the bushing bore. The pin will show the length of the bushings by the wear pattern on the pin.
Luck favors those who are prepared
User avatar
Bus Driver
Team Cub Mentor
Team Cub Mentor
 
Posts: 2620
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: 130 Axle Pivot Bushings.

Postby EZ » Thu Aug 16, 2012 8:59 pm

Complimentary 43455DR Axle Pivot Bushings came in today.

They have a split in them. Does it matter where the split is oriented when it is installed?
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest