This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Pulley for sickle bar
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Pulley for sickle bar
Is the pulley for Cub Cadet sickle bar hard to find?
- gitractorman
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Pulley for sickle bar
I've never actually seen the complete setup for a sickle bar mower on a Cub Cadet. However, I do know they were made by Haban, and I believe they utilized the front PTO and two pulleys on the mule drive assembly to get the belt run down to the sickle mower part where it mounts in the mid section of the tractor. Those parts are standard Cub Cadet and readily available.
Haban still makes some equipment/attachments for various machines, and I would think if you have part numbers you could find what you need on the internet. Having said that, I have never looked for anything for Haban equipment. However, I would bet, based on other equipment of their's that I have worked on, it is all standard dimension stuff that could be purchased from McMaster Carr or maybe even NAPA.
Haban still makes some equipment/attachments for various machines, and I would think if you have part numbers you could find what you need on the internet. Having said that, I have never looked for anything for Haban equipment. However, I would bet, based on other equipment of their's that I have worked on, it is all standard dimension stuff that could be purchased from McMaster Carr or maybe even NAPA.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: Pulley for sickle bar
Wow thanks thats a good post , I thought for sure that the pulley would be a hard to find item , I will check my local dealer tomorrow,
thanks
thanks
-
- 10+ Years
- Posts: 697
- Joined: Sun Mar 04, 2007 10:16 pm
- Zip Code: 52742
- Tractors Owned: Check out my signature!
- Circle of Safety: Y
- Location: IA, DeWitt
Re: Pulley for sickle bar
The Haban Sickelmo's didn't use the cub cadet mule drive system. It uses the front PTO and has a large pulley the rides straight below the front PTO. This large pulley runs a shaft that inturn runs the back belt which runs the actual sickle mower. This is of course if it hasn't been modified. I'll try to post a pic of my Haban 402D sicklemo for ya.
Tractors in the stable: '62 560D Cub Cadets in the stable: 782D, 1572 SGT, 1772 SGT, 1782 SGT
-
- 10+ Years
- Posts: 2212
- Joined: Mon May 15, 2006 4:26 am
- Zip Code: 12487
- Circle of Safety: Y
Re: Pulley for sickle bar
Well I am getting ahead of myself the sickle bar is not yet in my hands will have it early next week , I don't know which pulley is bad but I was told the CC with Haban mounted had sat for years and as a result it sunk in to the dirt which caused one of the pulleys to get badly rusted, CC was serviced up and when the pto was in gauged the sickle bar did work but he said that pulley is so bad the a new one is needed....
Who is online
Users browsing this forum: No registered users and 13 guests