Needle valves and seats to the Bash

The new home for CubFest and Tractor show Announcements & Discussions.

Moderator: Team Cub

Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
Bob McCarty
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 7587
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Needle valves and seats to the Bash

Postby Bob McCarty » Tue May 22, 2012 6:44 pm

I was measuring some old ones this afternoon. To my surprise, I found three different ID's on the seats, and two OD's on the needles. Enough difference that they are not interchangeable. If you have some old ones and are attending the Bash, please bring them so I can measure them. It may not clarify anything, but I've been in a state of confusion most of my life anyway. :lol:

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19942
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: Needle valves and seats to the Bash

Postby Barnyard » Tue May 22, 2012 6:50 pm

Bob McCarty wrote:but I've been in a state of confusion most of my life anyway.

Bob

So that's why I am still finding things you hid at the bash last year! :shock:
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
Boss Hog
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 10192
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: Needle valves and seats to the Bash

Postby Boss Hog » Tue May 22, 2012 7:20 pm

I will try to round up some
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
Mr E
5+ Years
5+ Years
501 Club
501 Club
Posts: 5668
Joined: Mon Jul 30, 2007 11:48 am
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety: Y
Location: FL, Sneads

Re: Needle valves and seats to the Bash

Postby Mr E » Tue May 22, 2012 8:04 pm

Barnyard wrote:
Bob McCarty wrote:but I've been in a state of confusion most of my life anyway.

Bob

So that's why I am still finding things you hid at the bash last year! :shock:


All of us that have hosted a Fest have a special appreciation for this statement. :lol: :lol:
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest #8
February 17 & 18, 2017

User avatar
sdurnal
5+ Years
5+ Years
501 Club
501 Club
Posts: 848
Joined: Thu May 06, 2010 1:36 pm
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety: Y
Location: IN, Columbus

Re: Needle valves and seats to the Bash

Postby sdurnal » Wed May 23, 2012 6:11 am

Bob, I have a new one from a TSC kit that has a viton tip, if it will do you any good. (After reading the comments about them, I re-used the old one) Can't explain why I kept it.. Just did..
Regards,

User avatar
Denny Clayton
10+ Years
10+ Years
501 Club
501 Club
Posts: 4122
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: Needle valves and seats to the Bash

Postby Denny Clayton » Wed May 23, 2012 8:38 am

sdurnal wrote:Bob, I have a new one from a TSC kit that has a viton tip, if it will do you any good. (After reading the comments about them, I re-used the old one) Can't explain why I kept it.. Just did..
Regards,

In case you needed it later..............if you can find it. :shock: :lol:
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'48 Cub
C-3 mower, FH Woods 42F, 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier

User avatar
sdurnal
5+ Years
5+ Years
501 Club
501 Club
Posts: 848
Joined: Thu May 06, 2010 1:36 pm
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety: Y
Location: IN, Columbus

Re: Needle valves and seats to the Bash

Postby sdurnal » Wed May 23, 2012 10:17 am

Me thinks you speak from experience, Denny! hehe cya soon..


Return to “CubFest and Tractor Show Announcements & Discussions”

Who is online

Users browsing this forum: No registered users and 0 guests