Barnyard Bash Projects

The new home for CubFest and Tractor show Announcements & Discussions.

Moderator: Team Cub

Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.

Re: Barnyard Bash Projects

Postby BIGHOSS » Sat May 12, 2012 6:58 am

I have never seen a cub engine dis-assembled, inspected and measured to check for wear. I would like to see this at a Cubfest, sometime.
We make a living by what we get, but we make a life by what we give......Winston Churchill
User avatar
BIGHOSS
5+ Years
5+ Years
 
Posts: 1255
Joined: Tue Jul 18, 2006 9:55 pm
Location: TN, Lebanon
Zip Code: 37087
Tractors Owned: 1947 Cub S/N 9216
1960 Cub S/N 217053
1974 Cub S/N 244814
w/ C-22 Mower & C-144 Cultivator

Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Barnyard » Sat May 12, 2012 7:08 am

BIGHOSS wrote:I have never seen a cub engine dis-assembled, inspected and measured to check for wear. I would like to see this at a Cubfest, sometime.

I have a basket case engine here that a previous owner completely disassembled because he thought he had a serious problem only to find out he had a stuck valve. He ended up discouraged and sold the thing as was.

If any one has the stuff to do it you all can use it as a show and tell. Heck if everything is there (or if I need to order any parts) it might just end up as a complete, running engine when done. :D
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17923
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Gary Dotson » Sat May 12, 2012 8:33 am

I'll bring my bore gauge and mics. I have plasti-gage, but it may be too old, I'll check.
Gary Dotson
Team Cub Mentor
Team Cub Mentor
 
Posts: 2560
Joined: Thu Aug 03, 2006 6:20 am
Location: OH West Mansfield
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Barnyard » Sat May 12, 2012 8:50 am

Gary Dotson wrote:I'll bring my bore gauge and mics. I have plasti-gage, but it may be too old, I'll check.

Thanks Gary! That should give the guys a good idea what to look for when working on theirs. It might put me a step closer to getting mine back togetehr also. Sounds like a win/win situation. :D
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17923
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby hpierce » Sun May 13, 2012 4:39 pm

Would there be anyone at the Bash able to check out my Mag and maybe rebuild if necessary? It is not currently on a Cub
but I would like to replace a distributor with a Mag later this year and would like to have a good one ready.

Harlan
hpierce
5+ Years
5+ Years
 
Posts: 116
Joined: Sun Apr 08, 2007 8:50 pm
Location: IL, Bluford
Zip Code: 62814
Tractors Owned: 1947 Circle Cub
1948 Cub
1949 Cub
1955 Lo-Boy
1966 Lo-Boy
1970 Cub
1946 Farmall A
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Gary Dotson » Mon May 14, 2012 6:52 am

Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.
Gary Dotson
Team Cub Mentor
Team Cub Mentor
 
Posts: 2560
Joined: Thu Aug 03, 2006 6:20 am
Location: OH West Mansfield
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Barnyard » Mon May 14, 2012 6:56 am

Gary Dotson wrote:Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.

Rick and I exchanged PM's last week and unfortunately he won't be able to make it this year. Bring the mag along and, as Gary said, we can have a look at it.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17923
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby John(videodoc) » Mon May 14, 2012 7:24 am

Barnyard wrote:
Gary Dotson wrote:Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.

Rick and I exchanged PM's last week and unfortunately he won't be able to make it this year. Bring the mag along and, as Gary said, we can have a look at it.


Can i bring that tool he wanted and you get it to him, Bill?
User avatar
John(videodoc)
5+ Years
5+ Years
 
Posts: 6451
Joined: Mon Jul 25, 2005 10:16 pm
Location: IL, Paris just off of Interstate 70
Zip Code: 61944
Tractors Owned: -
55 F-Cub - snow plow and chains
4 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Louise"(Done) IH 1000 One arm Loader
"Sandy"(Done) 193 Plow

1950 Demo "Billie" -(Woods 59")
Corn Stalk Cutter
23a Disc
Mid Mount Grader Blade
&
2005 Mahindra w/FEL
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Barnyard » Mon May 14, 2012 8:22 am

John(videodoc) wrote:
Barnyard wrote:
Gary Dotson wrote:Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.

Rick and I exchanged PM's last week and unfortunately he won't be able to make it this year. Bring the mag along and, as Gary said, we can have a look at it.


Can i bring that tool he wanted and you get it to him, Bill?

You can bring it but you might want to contact him and see how soon he needs it. I will be seeing him but I don't know how soon that might be.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17923
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby cubbrian » Mon May 21, 2012 10:07 pm

Not really cub related, but I have a 140 touch control unit that I plan on bringing for new seals/gaskets.
cubbrian
5+ Years
5+ Years
 
Posts: 761
Joined: Sun Apr 08, 2007 7:47 pm
Location: IN, New Harmony
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor

Re: Barnyard Bash Projects

Postby Former Member » Mon May 21, 2012 11:57 pm

I have a transmission I would like to bring. Boss has agreed to give me a tutorial on what to look for in a used tranny as to what is good, what is not, when looking to buy or sell one.
Former Member
5+ Years
5+ Years
 
Posts: 6416
Joined: Tue Jan 29, 2008 10:56 pm
Zip Code: 00000
Circle of Safety Award
Circle of Safety: Y

Previous

Return to CubFest and Tractor Show Announcements & Discussions

Who is online

Users browsing this forum: No registered users and 2 guests