Barnyard Bash Projects
Moderator: Team Cub
Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.
IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.
IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
-
- 10+ Years
- Posts: 1645
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Barnyard Bash Projects
I have never seen a cub engine dis-assembled, inspected and measured to check for wear. I would like to see this at a Cubfest, sometime.
We make a living by what we get, but we make a life by what we give......Winston Churchill
-
- Team Cub
- Posts: 20899
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Barnyard Bash Projects
BIGHOSS wrote:I have never seen a cub engine dis-assembled, inspected and measured to check for wear. I would like to see this at a Cubfest, sometime.
I have a basket case engine here that a previous owner completely disassembled because he thought he had a serious problem only to find out he had a stuck valve. He ended up discouraged and sold the thing as was.
If any one has the stuff to do it you all can use it as a show and tell. Heck if everything is there (or if I need to order any parts) it might just end up as a complete, running engine when done.

It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

- Franklin D. Roosevelt -

-
- Team Cub Mentor
- Posts: 3017
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Barnyard Bash Projects
I'll bring my bore gauge and mics. I have plasti-gage, but it may be too old, I'll check.
-
- Team Cub
- Posts: 20899
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Barnyard Bash Projects
Gary Dotson wrote:I'll bring my bore gauge and mics. I have plasti-gage, but it may be too old, I'll check.
Thanks Gary! That should give the guys a good idea what to look for when working on theirs. It might put me a step closer to getting mine back togetehr also. Sounds like a win/win situation.

It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

- Franklin D. Roosevelt -

-
- 10+ Years
- Posts: 138
- Joined: Sun Apr 08, 2007 8:50 pm
- Zip Code: 62814
- Tractors Owned: 1947 Circle Cub
1948 Cub
1949 Cub
1955 Lo-Boy
1966 Lo-Boy
1970 Cub
1946 Farmall A - Circle of Safety: Y
- Location: IL, Bluford
Re: Barnyard Bash Projects
Would there be anyone at the Bash able to check out my Mag and maybe rebuild if necessary? It is not currently on a Cub
but I would like to replace a distributor with a Mag later this year and would like to have a good one ready.
Harlan
but I would like to replace a distributor with a Mag later this year and would like to have a good one ready.
Harlan
-
- Team Cub Mentor
- Posts: 3017
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Barnyard Bash Projects
Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.
-
- Team Cub
- Posts: 20899
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Barnyard Bash Projects
Gary Dotson wrote:Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.
Rick and I exchanged PM's last week and unfortunately he won't be able to make it this year. Bring the mag along and, as Gary said, we can have a look at it.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

- Franklin D. Roosevelt -

-
- 10+ Years
- Posts: 6546
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
Re: Barnyard Bash Projects
Barnyard wrote:Gary Dotson wrote:Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.
Rick and I exchanged PM's last week and unfortunately he won't be able to make it this year. Bring the mag along and, as Gary said, we can have a look at it.
Can i bring that tool he wanted and you get it to him, Bill?
-
- Team Cub
- Posts: 20899
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Barnyard Bash Projects
John(videodoc) wrote:Barnyard wrote:Gary Dotson wrote:Harlan, we can have a look at it but if Rick Spivey makes it to the Bash, we'll let him lay his hands on it.
Rick and I exchanged PM's last week and unfortunately he won't be able to make it this year. Bring the mag along and, as Gary said, we can have a look at it.
Can i bring that tool he wanted and you get it to him, Bill?
You can bring it but you might want to contact him and see how soon he needs it. I will be seeing him but I don't know how soon that might be.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

- Franklin D. Roosevelt -

-
- 10+ Years
- Posts: 831
- Joined: Sun Apr 08, 2007 7:47 pm
- Zip Code: 47631
- Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor - Location: IN, New Harmony
Re: Barnyard Bash Projects
Not really cub related, but I have a 140 touch control unit that I plan on bringing for new seals/gaskets.
-
- 10+ Years
Re: Barnyard Bash Projects
I have a transmission I would like to bring. Boss has agreed to give me a tutorial on what to look for in a used tranny as to what is good, what is not, when looking to buy or sell one.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Barnyard Bash Projects
by Barnyard » Wed Apr 27, 2016 8:31 am » in CubFest and Tractor Show Announcements & Discussions - 32
- 1539
-
by sdurnal
Tue May 31, 2016 6:17 am
-
-
-
Barnyard Bash Projects
by Barnyard » Tue May 09, 2017 10:36 pm » in CubFest and Tractor Show Announcements & Discussions - 15
- 967
-
by Denny Clayton
Wed May 31, 2017 11:19 am
-
-
-
A Big Barnyard Bash Thank You!
by Barnyard » Mon Jun 06, 2016 8:51 am » in CubFest and Tractor Show Announcements & Discussions - 0
- 273
-
by Barnyard
Mon Jun 06, 2016 8:51 am
-
-
-
A big thanks to all at the Barnyard Bash! Attachment(s)
by Barnyard » Mon Jun 01, 2015 10:27 am » in CubFest and Tractor Show Announcements & Discussions - 6
- 442
-
by cubbrian
Wed Jun 03, 2015 8:56 am
-
-
-
What about the Barnyard Bash?
by BIGHOSS » Fri May 22, 2015 5:47 pm » in CubFest and Tractor Show Announcements & Discussions - 30
- 1141
-
by 1541
Thu May 28, 2015 5:44 pm
-
Return to “CubFest and Tractor Show Announcements & Discussions”
Who is online
Users browsing this forum: No registered users and 2 guests