Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Moderator: Team Cub
6 posts • Page 1 of 1
Finally finished Mama's yard art project. She had wanted a larger windmill for the back yard and the "store bought" 8 footer was getting shopworn. We bought the "head" assembly about two years ago and I finally got around to completing the tower yesterday. Used 2x2x1/8" and 1x1x1/8" angle iron for construction and poured 4 support columns with imbedded "J" bolts to tie it down. Brush painted it with Rustoleum Hammered Silver--gives a good "galvanized" look. The head assy. consisted of the vane and fan and is sturdily built with square tubing, a 1" arbor for the fan and sealed bearings. With luck, the only maintenance will be paint touch up. I measured the fan, compared it to the fan on the 8 footer and upsized the tower by approx 1/3 to maintain scale. No close ups as my stick welding abilities are far from professional
Looking good. Keep a good woman happy and you will have an enjoyable lo0ng life.
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill
Very nice job Bill, your wife should enjoy her wind mill for many years. Looks like a pretty neat weather station, wind direction, rain gauge and all.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Good job, Bill. With it being out there in the yard, you should get some movement if any wind is blowing at all.
There's an old standard height (if there is such a thing) windmill for sale not too far away from. I had given thought to checking it out. Would look nice set up in the back yard.
Thanks for sharing pictures/story. As long as "mama" is happy, that's all that matters!!
My 1945 Farmall H makeover
Thanks guys. Would have liked a standard sized mill, but don't think the neighbors would have been too keen on the idea, AND, being the highest point around, it would have needed considerable grounding
6 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests