This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 w/ 3260 mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2
- Joined: Thu Apr 26, 2012 6:24 pm
- Zip Code: 01077
154 w/ 3260 mower
I have recently purchased a 154 low boy and got a 3260 mower with it, I have purchased all the missing brackets etc. i needed to mount it but was wondering if anyone had a detailed picture of how it actually mounts to the tractror front and rear, I spoke with a nice fella named hamilton bob and he suggested this question be put out on this forum, any and all help will be greatly appreciated
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: 154 w/ 3260 mower
G'day and congrats on acquiring your 1st new to you Cub Unfortunately I do not have a lot of information on the Numbered Series Cubs but I do have a few items. If you follow the Cub-154 Lo-Boy it will take you to the TC-131 Parts Catalog Revision 8 where you will find the Parts Breakdowns for the various IH Implements available for the 154 such as the IH 3260 Rotary Cutter. That should be of some assistance in mounting your mower. Sorry I don't have anything else on the Implements.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 11
- Joined: Sun Aug 04, 2013 4:53 pm
- Zip Code: 26062
- Tractors Owned: 1969 cub lo boy 154
Re: 154 w/ 3260 mower
I know this is an older post but I was having the same issue. I was able to find some pictures on line and thought I would share.
- Attachments
-
- image.jpg (58.47 KiB) Viewed 597 times
-
- image.jpg (51.55 KiB) Viewed 597 times
-
- 10+ Years
- Posts: 11
- Joined: Sun Aug 04, 2013 4:53 pm
- Zip Code: 26062
- Tractors Owned: 1969 cub lo boy 154
Re: 154 w/ 3260 mower
Well after spending several hours trying to mount my 3260 like the above photos, I still can not attach it like the photo and have it not bind up. I can not seem it put the pin with the spacers in. Any suggestions? Here are some pics as it is sitting right now. The top pic is of the right side if you are sitting on the tractor. Notice the pin is not installed. The second pic is of the left side. It seems to work correctly.
- Attachments
-
- image.jpg (369.51 KiB) Viewed 581 times
-
- image.jpg (347.62 KiB) Viewed 581 times
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 154 w/ 3260 mower
Check the hydraulic cylinder centered under the tractor. You may need to get the piston pushed back into the cylinder. To do that you need the weight of the mower. Reality show. I messed up when is removed the deck and cycled the hydraulics - leaving the lower piston extended.
I had the same problem initially mounting my 3260 mower after removal to work on. I wound up using a farm jack to jack up and block one corner of the deck at a time and fastening some brackets. Then moving the jack to another corner and getting a few more brackets - until I could put weight on the hydraulic system to close the center cylinder.
I had the same problem initially mounting my 3260 mower after removal to work on. I wound up using a farm jack to jack up and block one corner of the deck at a time and fastening some brackets. Then moving the jack to another corner and getting a few more brackets - until I could put weight on the hydraulic system to close the center cylinder.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 11
- Joined: Sun Aug 04, 2013 4:53 pm
- Zip Code: 26062
- Tractors Owned: 1969 cub lo boy 154
Re: 154 w/ 3260 mower
On to the next deck issue. Does anyone have a good picture of the belt tensioner? I have a pretty good idea that mine is not on correct.
- Attachments
-
- image.jpg (420.31 KiB) Viewed 499 times
-
- image.jpg (373.91 KiB) Viewed 499 times
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: 154 w/ 3260 mower
2nd photo. The belt tensioner is a coil type spring that fits under the post on the right side of the photo.
As long as spring, the current system, doesn't rub on the belt or pulley, I'd use it.
As long as spring, the current system, doesn't rub on the belt or pulley, I'd use it.
I have an excuse. CRS.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 382
-
by john2189
Mon May 09, 2022 4:51 pm
-
- 2
- 774
-
by murph51
Sat Aug 05, 2023 6:14 am
-
- 3
- 146
-
by outdoors4evr
Thu Apr 04, 2024 8:50 am
-
-
LoBoy 154 - 3260 Deck Removal?
by Dougget » Mon Apr 01, 2024 9:33 am » in Lo-Boy Series - 154, 184, 185 - 3
- 109
-
by SONNY
Sun Apr 07, 2024 9:13 am
-
-
- 6
- 752
-
by SONNY
Thu Sep 30, 2021 7:16 pm
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 2 guests