Help!
I have an old 'H' with a farmall loader that is a handy thing, BUT,,,
for a while it was really haesitant to turn over - cleaned up the starter, all the joints in the wiring, new points etc., Success, almost.
Now it starts on the first turn over, but immediately quits again. Also it will only fire with the throttle closed [at the idle position].
Any thoughts?
Magic words?
[Please hasn't addressed the problem yet]
TIA!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Goofy_Interesting starting problem w_Farmall 'H'
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 424
- Joined: Mon Feb 03, 2003 12:35 am
- Zip Code: 46750
- Tractors Owned: '59 cub running
'48 'H' running?
'54 '400' project
'67 806' project
?? '706' project
'70' 826G Hydro 'every day power! 1 of 14
'71' MM G1050 - Big iron
'51' JD 'R' project
'61 JD 3010 project
'48 Allis 'G'
'??' F-12 my son's - Location: INDIANA, NE
Goofy_Interesting starting problem w_Farmall 'H'
One of the few advantages of growing older is that I finally realized that I haven't made ALL the stupid mistakes! Yet!
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Larry, clean the main jet on the carb.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- 10+ Years
- Posts: 424
- Joined: Mon Feb 03, 2003 12:35 am
- Zip Code: 46750
- Tractors Owned: '59 cub running
'48 'H' running?
'54 '400' project
'67 806' project
?? '706' project
'70' 826G Hydro 'every day power! 1 of 14
'71' MM G1050 - Big iron
'51' JD 'R' project
'61 JD 3010 project
'48 Allis 'G'
'??' F-12 my son's - Location: INDIANA, NE
B.D. -
Thanks much for the quick response -
I did as you suggested, put it back together and it worked some better.
THEN...
I tumbled that it ran until I let off the starter button - strange -
I finally realized that as I put wires back after cleaning contacts, I had put the hot to the switch on the downsteam side of the starter button! Thus when I let off the starter, the system lost power and died. DUH!
[Note the signature tag line]
Cleaning the main jet did help - now the engine will accelerate instead of dying when the throttke is opened.
THANK YOU1
Thanks much for the quick response -
I did as you suggested, put it back together and it worked some better.
THEN...
I tumbled that it ran until I let off the starter button - strange -
I finally realized that as I put wires back after cleaning contacts, I had put the hot to the switch on the downsteam side of the starter button! Thus when I let off the starter, the system lost power and died. DUH!
[Note the signature tag line]
Cleaning the main jet did help - now the engine will accelerate instead of dying when the throttke is opened.
THANK YOU1
One of the few advantages of growing older is that I finally realized that I haven't made ALL the stupid mistakes! Yet!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Interesting possible backfire issue
by pokitisme » Mon Jun 05, 2023 8:32 pm » in Farmall H, HV, Super H, 300 & 350 - 13
- 1318
-
by pokitisme
Mon Oct 23, 2023 12:21 am
-
-
- 1
- 781
-
by ShawnAgne
Tue May 23, 2023 8:28 pm
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests