This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1450 mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
1450 mower
I can't keep my mower attached to the mule drive or carrier it comes unhooked almost immediatley when I start mowing, is the bail supposed to be up or down to lock it in?
Jim Turner
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Re: 1450 mower
Jim,
Bail should be up to lock the subframe in place, down to remove or install it. The bail is normally spring loaded to the up or locked position, but if the springs are broken or missing, you may need to secure the bail in the up position someway.
Bail should be up to lock the subframe in place, down to remove or install it. The bail is normally spring loaded to the up or locked position, but if the springs are broken or missing, you may need to secure the bail in the up position someway.
-
- 10+ Years
- Posts: 1750
- Joined: Sun Feb 02, 2003 1:09 pm
- Zip Code: 64784
- Circle of Safety: Y
- Location: Mo, Sheldon
- Contact:
Who is online
Users browsing this forum: No registered users and 13 guests