193 plow depth adjuster

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

farmall guy
Posts: 7
Joined: Sun Mar 11, 2012 8:45 pm
Zip Code: 14837

193 plow depth adjuster

Postby farmall guy » Sun Mar 18, 2012 5:40 pm

To cheap to buy one so i figure i would try and build my own. Works great once u get it set where u want it.
IMG_0926[1].JPG
IMG_0927[1].JPG
IMG_0928[1].JPG
You do not have the required permissions to view the files attached to this post.

User avatar
Jimdawg
5+ Years
5+ Years
501 Club
501 Club
Posts: 629
Joined: Tue May 01, 2007 4:05 pm
Zip Code: 02748
Location: MA, Dartmouth

Re: 193 plow depth adjuster

Postby Jimdawg » Sun Mar 18, 2012 6:58 pm

I've done something like that in a bind (ok...a couple of seasons), but the advantage of the depth lever is that you can adjust the depth of the plow while you move through the field. With an unadjustable link like what you have here, you'll have to plow the whole field to the depth of your most-difficult-to-plow area.

With that said, it is a solution to get the plow in the ground. Looks sharp!

farmall guy
Posts: 7
Joined: Sun Mar 11, 2012 8:45 pm
Zip Code: 14837

Re: 193 plow depth adjuster

Postby farmall guy » Sun Mar 18, 2012 7:11 pm

I totally agree, like u said its just to get plows in the ground (back yard garden)

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21531
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: 193 plow depth adjuster

Postby John *.?-!.* cub owner » Sun Mar 18, 2012 8:37 pm

If you check the travel of your rockshaft You will find that it moves much further than is needed to allow the plow the depth it needs. I have never tried it, but I believe that travel may be enough that you could connect the top link to it and use the hydraulics to fine tune the depth.
If you are not part of the solution,
you are part of the problem!!!


Return to “Projects Forum”

Who is online

Users browsing this forum: No registered users and 2 guests