What is this Sawblade for?

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

User avatar
Marion(57 Loboy)
10+ Years
10+ Years
501 Club
501 Club
Posts: 677
Joined: Sat Mar 29, 2003 4:17 pm
Zip Code: 00000
Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
Circle of Safety: Y
Location: Canton, Ohio

What is this Sawblade for?

Postby Marion(57 Loboy) » Thu Feb 09, 2012 10:30 pm

Here's one of the sawblades that I got with the radial arm saw deal.
It's 11" in diameter, and it's a Simond's.
There are just very sharp points, with the edge on alternating sides.
It looks like it can be mounted to cut in either direction?

Anyway, what's this saw blade designed to cut guys?

Image

Image

User avatar
Rudi
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 28707
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada

Re: What is this Sawblade for?

Postby Rudi » Thu Feb 09, 2012 11:10 pm

That appears to be one of the original hollow ground plywood blades. Meant for laminated veneer, when properly sharpened they left a very clean cut with minimal tearout. You don't see many of them used anymore, most shops no longer sharpen their own blades. They have usually been superseded by carbide crosscut blades for radials and usually 100 TPI ATB or Triple Chips for different laminates/cores.

I still have a couple of the old plywood blades my Dad had back in the 60's. Simmonds were a top name back then. Same company made the files used to sharpen them -- the triangular shaped files. I also have a replica of the blade clamp Dad had made to sharpen them on the bench. I still love to hear the sound of a sharp file as it cuts across the teeth. Needed to have a saw set as well to re-set for the kerf. This was a long time before the thin-kerf blades came on the market.

And NO! You cannot mount it in either direction. Follow the owner's manual for mounting blades. In general teeth should always rotate forward as in to the front of the table be it a table or radial arm saw.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Former Member
5+ Years
5+ Years

Re: What is this Sawblade for?

Postby Former Member » Thu Feb 09, 2012 11:14 pm

Blywood blades work well when reversed for cutting sheet metal, aluminum, steel building siding etc.. WEAR GOGGLES!!

User avatar
Stanton
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 3852
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1945 Farmall H, serial #213,651
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: What is this Sawblade for?

Postby Stanton » Fri Feb 10, 2012 7:47 am

Rudi's right on the blade. Plywood and veneer.
Stanton
Image Circle of Safety

Roy47
5+ Years
5+ Years
Cub Star
Cub Star
Posts: 122
Joined: Wed Oct 26, 2011 9:16 am
Zip Code: 30549
Tractors Owned: 62 Cub Lowboy
76 Ford 1600
555 Ford backhoe
67 Cub
Economy Jim Dandy
69 Massey Ferguson 135
Yanmar 2700
Case 1840 skid steer
2 - John Deere model 112
Location: Georgia, Jefferson

Re: What is this Sawblade for?

Postby Roy47 » Fri Feb 10, 2012 11:08 am

Plywood blade, I've got a little finer tooth one mounted on my table saw right now. Works good on thin plywood, not so good on thicker solid wood.
Roy

Anonymous_h
5+ Years
5+ Years

Re: What is this Sawblade for?

Postby Anonymous_h » Tue Feb 14, 2012 7:06 pm

Vinyl siding & soffit material


Return to “Projects Forum”

Who is online

Users browsing this forum: No registered users and 1 guest