router
Moderators: Team Cadet, Team Cub
Forum rules
Post your personal experiences with products and services here.
PLEASE: Do not post bad reviews until all attempts to reach an equatable settlement have all been exhausted. (Attempts to use the forum to leverage a settlement in your favor will result in deletion of your review.)
Post your personal experiences with products and services here.
PLEASE: Do not post bad reviews until all attempts to reach an equatable settlement have all been exhausted. (Attempts to use the forum to leverage a settlement in your favor will result in deletion of your review.)
4 posts
• Page 1 of 1
router
by DanR » Wed Dec 28, 2011 8:23 am
I bought a D-Link DIR615 router about a month ago. Problems from the start. I talked to D-Link support on two occasions and they tried to reconfigure the router without success. I finally took the router and i pad to Computer Pros not knowing which one was the problem. The technician looked at the router and said "oh one of those". Long story short the DIR 615 is junk.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1612
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: router
by John(videodoc) » Thu Dec 29, 2011 6:24 am
We have had our LINKSYS for several years now, with no problems. Probably should get a new one, as it is probably 6 yrs old. And there are faster and better ones out there i am sure. But we will stay with LINKSYS.
John
John
-
John(videodoc) - 501 Club
- Posts: 6343
- Joined: Mon Jul 25, 2005 10:16 pm
- Location: IL, Paris just off of Interstate 70
- Zip Code: 61944
- Tractors Owned: -
55 FCub
1950 Demo "Bette"(Done)22 mower
1950 Demo "Roxie"(Done)144 Complete Cult's
1950 Demo "Louise"(Done) IH 1000 One arm Loader
1950 Demo"Sandy"(Done) 193 Plow
1950 Demo "Dana"(Next)
1950 Demo "Billie" -(Woods 59")
Buzz saw
Corn Stalk Cutter
23a Disc
Mid Mount Grader Blade
&
2005 Mahindra w/FEL - Circle of Safety: Y
Re: router
by Rudi » Thu Dec 29, 2011 10:55 am
I looked at one of the DIR-615's to replace my old D-Link D-604 but decided to leave it where it was. One of my big problems was that the antenna a fixed and non-removable. This is not good as I have external antennas for my wireless network. Upgrading to a wireless router is supposed to make WAP's redundant however it looks like the N-Series are pretty much useless for my setup unless I am willing to spend $200.00 or more on a router which I am not. My ISP has a new router/modem for broadband and when my D-604 died I just moved to that one keeping my exisiting WAP. I have/had both Linksys (Cisco) and D-Link routers. I like the D-Links better and I prefer the Linksys for WAP's. I guess it is a matter of picking best-in-class and using those. Unfortunately everything is moving to point and click with very litle options for advanced users.
I may end up reverting to using Linux based routers eventually.
I may end up reverting to using Linux based routers eventually.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship 
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
-
Rudi - Team Cub
- Posts: 26999
- Joined: Sun Feb 02, 2003 8:37 pm
- Location: NB Dieppe, Canada
- Zip Code: E1A7J3
- eBay ID: ve9rhs
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC - Circle of Safety: Y
Re: router
by RUSSALL » Thu Dec 29, 2011 4:19 pm
I had a LINKSYS and it would not connect with this site (Farmallcub.com). nothing in the house would.I could not find any other site anywhere that it would not connect to. I thought I was black balled. W e had that router for years with out any trouble. I could access at work and on my wife's Droid. She bought another router, also a LINKSYS and all is good. I don't know why it targeted this site but it did. I'm starting to think she did something to block Farmallcub.com so I wouldn't spend so much time on here. either way I put up such a hissey fit we got a new router.
Russ
Russ
1979 International Cub (Artie),193 plow,22 sickle mower,144 cultivator,54a blade,59" belly mower,wheel weights
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
-
RUSSALL - 501 Club
- Posts: 819
- Joined: Tue Apr 08, 2008 7:01 pm
- Location: PA, Honey Brook
- Zip Code: 19344
- Circle of Safety: Y
4 posts
• Page 1 of 1
Return to Tool Talk / Products & Services reviews
Who is online
Users browsing this forum: No registered users and 1 guest
|
|