I was just communicating with MBergthold who informed me of a potential problem I may have. He had recently read an article about the necessity of soaking a new rear felt oil seal (part #4 http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%2061.jpg) with oil to preclude glazing the felt and possibly causing a leak. Well....I recently replaced mine, and did not do this. Is there ANY way to oil this felt now that the tractor is almost completely reassembled? The oil pan is off...can I spray/squirt oil up to the rear seal that way? Or can I reinstall the oil pan, OVER fill the engine with oil so it reaches the height of that rear seal and soak it for a day or so, then drain back down to normal "full"?
I REALLY do NOT want to split the tractor now that it has been painted, and everything is almost finished! Any suggestions would be appreciated.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super A Rear Engine Seal (felt)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Super A Rear Engine Seal (felt)
Last edited by Dale Finch on Thu Sep 22, 2011 8:04 pm, edited 1 time in total.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: Super A Rear Engine Seal (felt)
Dale - I think over-filling it will work.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Super A Rear Engine Seal (felt)
Hey, it's worth a try, right?...a few gallons (any guess how much??) of oil that maybe does the job...cheap and easy!! In any case, I might as well wait to split the tractor to see if the seal even starts leaking!
-
- Team Cub
- Posts: 11827
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Super A Rear Engine Seal (felt)
Dale, Hoist the front end up so the tractor is vertical. Then you'll only need about a couple cups of oil to cover the seal.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Super A Rear Engine Seal (felt)
Oh, Bob, that really made me laugh out loud!!!! Good one!
- Dale Finch
- 10+ Years
- Posts: 6645
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests