This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

HELP! Removing a c22 PTO pulley.

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Dualing Cubs
10+ Years
10+ Years
Posts: 292
Joined: Sat May 21, 2011 9:25 am
Zip Code: 23231
Tractors Owned: 1958,59',48' and 49' Farmall Cubs
Circle of Safety: Y
Location: Richmond. VA
Contact:

HELP! Removing a c22 PTO pulley.

Postby Dualing Cubs » Sat Sep 17, 2011 5:10 pm

Right now my father and I are trying to pull off the drive pulley off the PTO for a C22 sickle bar mower. I have a pulley or "hub" puller but it will not pull off and the pulley is cast which lead to us breaking a section of pulley off while using the puller. The set screw is out but the pulley won't budge! Please help! I have read all of the manuals and searched but found nothing specific to this.

[ Post made via iPhone ] Image
Josh ..

SPONSOR AD

Sponsor



Sponsor
 

User avatar
tractordad
10+ Years
10+ Years
Posts: 1475
Joined: Sat Sep 12, 2009 1:36 pm
Zip Code: 01516
Tractors Owned: 48 Cub w/ IH C2 mower
50 High wide "demo" cub with dual fertilizer hoppers
51 high wide cub w/474 planter
62 High wide cub w/ fast hitch
72 High wide w/cultivators
75 Red Long stripe w/fast hitch & C2 mower
76 Red long stripe w/IH 1000 loader & duals
77 long stripe with IH C2 belly mower
55 Super AV w/cultivators
56 Super AV
57 130 High crop w/cultivators
1 IH 574 w IH 2250
quick hitch loader
Circle of Safety: Y
Location: Douglas, MA

Re: HELP! Removing a c22 PTO pulley.

Postby tractordad » Sat Sep 17, 2011 5:25 pm

First, check inside the pulley itself and inspect the end of the pto shaft itself. I ran into the same issue. Mine was welded to the end of the pto shaft inside the pulley itself. If you've already damaged the pulley, use some heat. If you don't have a welding torch, use a sodering torch and have patience. Get a fair amount of heat to it, actullay drive it onto the shaft a bit to loosen it up, and then try to pull it off. If it does not come off, you will probably take less time in pulling the pto assembly out of the tractor itself and getting it off from there. If you have not done this before, be aware of the shifting coller on the end of the shaft in the tranny. I've had them fall off into the bottom of the tranny. Last option, buy a used assembly to replace it.

User avatar
Dualing Cubs
10+ Years
10+ Years
Posts: 292
Joined: Sat May 21, 2011 9:25 am
Zip Code: 23231
Tractors Owned: 1958,59',48' and 49' Farmall Cubs
Circle of Safety: Y
Location: Richmond. VA
Contact:

Re: HELP! Removing a c22 PTO pulley.

Postby Dualing Cubs » Sat Sep 17, 2011 5:40 pm

Got it! Thanks for the info. I used a high power heat gun and slowly pulled it off ... When I say slow I mean 30 mins of turning slow. It finally came off though. Someone had not replaced the pin in the shaft that sets the pulley in position and then they drove it on as far as they could so it was press fit on there farther than it should have been. Now I will try to braze the pulley back together from where it broke and use it as a last resort if I can't find the same pulley to buy.

[ Post made via iPhone ] Image
Josh ..

User avatar
Dualing Cubs
10+ Years
10+ Years
Posts: 292
Joined: Sat May 21, 2011 9:25 am
Zip Code: 23231
Tractors Owned: 1958,59',48' and 49' Farmall Cubs
Circle of Safety: Y
Location: Richmond. VA
Contact:

Re: HELP! Removing a c22 PTO pulley.

Postby Dualing Cubs » Mon Sep 19, 2011 5:07 pm

I took the pulley to work with me today and brazed it with a tig torche using the solicon bronze rod. It will work fine now so we can put the c22 back on to cut my fields that have grown up again. Once the hurricane took down seven trees, cutting the grass was the last of my worries.

I can also buy a new pulley from case for around $122.00

[ Post made via iPhone ] Image
Josh ..

User avatar
Dualing Cubs
10+ Years
10+ Years
Posts: 292
Joined: Sat May 21, 2011 9:25 am
Zip Code: 23231
Tractors Owned: 1958,59',48' and 49' Farmall Cubs
Circle of Safety: Y
Location: Richmond. VA
Contact:

Re: HELP! Removing a c22 PTO pulley.

Postby Dualing Cubs » Wed Sep 28, 2011 4:17 pm

Put the pulley back on 2 days ago with the c22 and it works great. Gotta love welding :)

[ Post made via iPhone ] Image
Josh ..

jimjo2
10+ Years
10+ Years
Posts: 1
Joined: Mon Jul 29, 2013 7:40 pm
Zip Code: 46514

Re: HELP! Removing a c22 PTO pulley.

Postby jimjo2 » Mon Jul 29, 2013 8:08 pm

Dueling Cubs, can you tell me, is the pulley pressed onto the shaft or is it threaded? Mine has a hex-shaped hub. I know this is post but was hoping to get some help

User avatar
tmays
10+ Years
10+ Years
Posts: 3402
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39154
Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H
Location: Raymond, MS

Re: HELP! Removing a c22 PTO pulley.

Postby tmays » Mon Jul 29, 2013 8:22 pm

jimjo2 wrote:Dueling Cubs, can you tell me, is the pulley pressed onto the shaft or is it threaded? Mine has a hex-shaped hub. I know this is post but was hoping to get some help

I believe you are referring to a different pulley than Dualing Cubs?
Thomas

ScottyD'sdad
Cub Pro
Cub Pro
Posts: 7504
Joined: Thu Aug 31, 2006 7:00 pm
Zip Code: 02769
Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator
Circle of Safety: Y
Location: Ma. Rehoboth

Re: HELP! Removing a c22 PTO pulley.

Postby ScottyD'sdad » Mon Jul 29, 2013 8:51 pm

jimjo2 wrote:Dueling Cubs, can you tell me, is the pulley pressed onto the shaft or is it threaded? Mine has a hex-shaped hub. I know this is post but was hoping to get some help

That pulley is threaded, LEFT hand thread, if its the one I think you're referring to. Ed
Image
Member of Chapter 18, and National
Circle of Safety

User avatar
Dualing Cubs
10+ Years
10+ Years
Posts: 292
Joined: Sat May 21, 2011 9:25 am
Zip Code: 23231
Tractors Owned: 1958,59',48' and 49' Farmall Cubs
Circle of Safety: Y
Location: Richmond. VA
Contact:

Re: HELP! Removing a c22 PTO pulley.

Postby Dualing Cubs » Sun Aug 04, 2013 8:15 pm

jimjo2 wrote:Dueling Cubs, can you tell me, is the pulley pressed onto the shaft or is it threaded? Mine has a hex-shaped hub. I know this is post but was hoping to get some help


All the pulleys that fit on the shaft have keyways to fit on the splined shaft . Is that what you needed to know?
Josh ..

User avatar
pickerandsinger
10+ Years
10+ Years
Posts: 1501
Joined: Thu Oct 18, 2012 3:23 pm
Zip Code: 13143
Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog
Circle of Safety: Y

Re: HELP! Removing a c22 PTO pulley.

Postby pickerandsinger » Mon Aug 05, 2013 4:40 am

Boy did that story sound familiar...Mine didn't end as well as my pulley was toast after the "removal" :shock: ...I ended up putting a new shaft as well :shock: ....122.00 for a pulley...Who'd a thunk it....Really have no need for the C-22 so I never bought another pulley...Glad you had a successful ending.....Dave
In Memory of 58,286


Return to “Farmall Cub”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 26 guests