6 volt distributor

Farmall H, HV & Super H, 1939-1954

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

6 volt distributor

Postby Phillip W. Lenke » Wed Aug 31, 2011 7:38 am

Getting the 42 H back together ,have the casting painted, plan to do it up next year on the sheet metal, gives me all winter to straghten it and prep.
I am putting the distributor on , the drive shaft came out , How do you put it back to be sure it is timed correctly.
it is a 353898R1
Thanks in advance
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 6 volt distributor

Postby Eugene » Wed Aug 31, 2011 7:57 am

I am putting the distributor on , the drive shaft came out , How do you put it back to be sure it is timed correctly.
Guessing, I don't understand the problem.

If the drive shaft is the one in the distributor, it is normally pinned to the distributor drive gear. The gear can only be pinned to the shaft in two locations - doesn't make a difference as long as the gear is not upside down.

If the drive shaft is the one in the distributor drive housing - again - only goes in two ways - doesn't make a difference.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12116
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: 6 volt distributor

Postby John *.?-!.* cub owner » Wed Aug 31, 2011 8:10 am

It has been any years since I had an H distributor apart, but as I recall it is similar to a cub. So you would set engine on #1 TDC, then use the drive to turn rotor to #1 , then remove drive shaft and reinstall it to match the drive slots on the engine.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19092
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: 6 volt distributor

Postby Boss Hog » Wed Aug 31, 2011 8:49 am

Like John said :D
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9650
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: 6 volt distributor

Postby Phillip W. Lenke » Wed Aug 31, 2011 9:07 am

Image


The part is out of the drive end of the Distributor. should it have been pinned in? , this is how I pulled it off the H , before restoration . SO ,this is on the PO
Thanks Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 6 volt distributor

Postby Jim Becker » Wed Aug 31, 2011 10:29 am

If the ignition points aren't in place and gap set, do that.
Insert the shaft into the distributor.
Hold the distributor assembly upright so the attachment bolt holes are at 6 and 12 o'clock.
Slowly rotate the shaft clockwise until you feel the slight resistance of the points cam touching the igniton points.
Check orientation of drive lugs on shaft, if not at 35 degrees from horizontal (roughly 4 - 10 o'clock) carefully pull out and reinstall at 4 -10 o'clock.
Repeat the last step until you get it right.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11845
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y

Re: 6 volt distributor

Postby Boss Hog » Wed Aug 31, 2011 10:30 am

NO! Eugene was talking about the drive gear on the Dist.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9650
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: 6 volt distributor

Postby Phillip W. Lenke » Wed Aug 31, 2011 10:35 am

Thanks Guys
trial and error i guess.
We will get herthough
Thanks a bunch gives me a place to start.
no pun intended.
Phil
"Work Hard ,Play Often,Care Always"
Phillip W. Lenke
501 Club
501 Club
 
Posts: 1479
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Re: 6 volt distributor

Postby Bigdog » Wed Aug 31, 2011 11:48 am

To answer your other question - no - that shaft is not pinned in. I'd hate to count the number of times I've dropped one out of the distributor.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Re: 6 volt distributor

Postby Eugene » Wed Aug 31, 2011 4:05 pm

Phillip W. Lenke wrote:Image


The part is out of the drive end of the Distributor. should it have been pinned in? , this is how I pulled it off the H , before restoration . SO ,this is on the PO.Thanks Phil
NO. Not pinned. You need to seperate the distributor from the distributor drive housing. Install the part pictured above, then the distributor drive housing.

Engine TDC #1 cylinder. Rotor pointing to #1 spark plug tower location on the distributor. Install distributor so that it's centered in the adjusting slot and the rotor is pointing to the #1 plug tower location. Then static time engine.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12116
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: 6 volt distributor

Postby John *.?-!.* cub owner » Wed Aug 31, 2011 8:47 pm

Bigdog wrote:To answer your other question - no - that shaft is not pinned in. I'd hate to count the number of times I've dropped one out of the distributor.
I will not repeat what I said the first time I dropped one out of a distributor. I had always worked on magnetos and was working on neighbors distributor. Nearly had a heart attack
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19092
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: 6 volt distributor

Postby klyant » Thu Sep 08, 2011 9:14 pm

I would think if you get the tractor on TDC on no. 1 cylinder, then point the rotor to the no. 1 tower on the dist cap. then put the shaft back in so it matches up with the slot in the drive.
klyant
Cub Star
Cub Star
 
Posts: 72
Joined: Sun Dec 30, 2007 7:55 pm
Location: nebraska

Re: 6 volt distributor

Postby Eugene » Thu Sep 08, 2011 10:54 pm

klyant wrote:I would think if you get the tractor on TDC on no. 1 cylinder, then point the rotor to the no. 1 tower on the dist cap. then put the shaft back in so it matches up with the slot in the drive.
You need to follow my suggestion on installing the parts. One tooth off equals 10 degrees.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12116
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y


Return to Farmall H & Super H

Who is online

Users browsing this forum: No registered users and 2 guests