I have an IH-1000 loader on my Farmall 100 and it has only been on there since spring. It worked good up to a week or so ago. It was not lifting well or pushing the the front bucket up and forward. I checked the hydraulic fluid and it seemed low so I put some in it today and it seemed to help but now the return line is pulsating the whole time unless you are lifting or tilting the bucket. It makes a pulsating sound at the tractor also and you can see the hose bouncing. do I have air in the system or is there another problem? any help or suggestions would be great.
thanks
Chad
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
IH-1000 loader problems
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- cjpenny89
- 10+ Years
- Posts: 1080
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
IH-1000 loader problems
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: IH-1000 loader problems
Chad:
Although I have no experience with a loader yet, I have unfortunately been learning hydraulics the hard way. It kinda sounds like you have air in the system. Try bleeding the system and check the level again. You may have to do it a few times to get the air out.
Let us know what happens.
Although I have no experience with a loader yet, I have unfortunately been learning hydraulics the hard way. It kinda sounds like you have air in the system. Try bleeding the system and check the level again. You may have to do it a few times to get the air out.
Let us know what happens.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 7 guests