This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
belt pulley housing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
leroy68
- 10+ Years
- Posts: 28
- Joined: Thu Jun 02, 2011 8:31 pm
- Zip Code: 30520
belt pulley housing
Pulled mine off bearing looks good but leaking a little around outside of shaft should oil seal fix this problem? What else do i need to do since i have it off?
-
leroy68
- 10+ Years
- Posts: 28
- Joined: Thu Jun 02, 2011 8:31 pm
- Zip Code: 30520
Re: belt pulley housing
Is there suppose to be a gasket behind the plate on the right side where the oil seal is at
- Attachments
-
-
Dale Finch
- 10+ Years
- Posts: 6677
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: belt pulley housing
If you remove the retainer, #48, you'll need to replace the gasket #47. Don't think it was necessary, though, when just replacing the seal #49.
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20268.jpg
Dale F
http://www.cleancomputes.com/Cub/Super%20A%20-%20Super%20AV/TC-39B%20Parts%20Catalog/Page%20268.jpg
Dale F
Dale Finch
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 21 guests
