cub implement part? ID

[Kirk-NJ]

Cleaning out a friends barn. Is this a cub part? Kind of hard to see. It's sitting on top of an old running gear frame. His uncle had cubs and a super A and a C. Just trying to figure out what is what.
Thanks

[Gator809]

I think it's a rear cultivator section off a C or bigger.

Hank

[Bill Hudson]

Also has the jockey arch.

Bill

[v w]

Yeah. C, H and M. The U shape in the shaft was to clear the PTO shield. The short tubes are for the lift arms that run forward to the lift cylinders which were on the sides of the engine. As memory best serves me but it has been over 50 years since I mounted one. Vern

[mikethefixitman1]

I'm thinkin bigger. At least a C or H or even an M.They may have all been the same.But thats defineatly a rear culitavtor section and I do remember that rear loop.

[CapeCodCubs]

Jockey arch was the give away to it being a rear cultivator section...what it is for????

[danovercash]

My vote, Super C. We had one like that on Granddads farm.

[Boss Hog]

That is off a C or SC
Boss

[KETCHAM]

My H cults for the rear are bigger,,,,I'm going with David on this.C all the way!!!! Kevin

[Kirk-NJ]

Thank for the replies. I didn't see anything in the cub manual section that came close.

[Boss Hog]

My H cults for the rear are bigger,,,,I'm going with David on this.C all the way!!!! Kevin

No speculation on my part, just stating a fact

[Dusty B]

Agee w/the C - and they are a b****** to mount because they clamp around the rear axle!! Don't ask me how I know! Dusty B