So I ordered and received an operators manual for the H and decided to remove the hood and check on a few things on this "factory correct" beast.
The new paint job is not too awful bad, but they certainly didn't do a perfect job.
I started looking for lube spots and something didn't look right on the generator.
The front oil port is on the wrong side.
As a matter of fact, it's impossible to access.
It even looks like the rear port is on the wrong side also, but at least it's accessible.
So, any red guys out there who have seen this before? If so what do I do about it?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Generator oil port problem 1950 Farmall H
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 25
- Joined: Mon May 12, 2008 9:03 am
- Zip Code: 45693
- Tractors Owned: 1948 Cub
1982 JD 750
1956 INTERNATIONAL 350u
1950 Farmall H - Location: SW Ohio
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: Generator oil port problem 1950 Farmall H
Gently pry it up and drive it in the other side.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 25
- Joined: Mon May 12, 2008 9:03 am
- Zip Code: 45693
- Tractors Owned: 1948 Cub
1982 JD 750
1956 INTERNATIONAL 350u
1950 Farmall H - Location: SW Ohio
Re: Generator oil port problem 1950 Farmall H
Thanks, Bigdog, I didn't think it would be that simple, but here's the result.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 752
-
by Gary Dotson
Wed May 10, 2023 7:31 am
-
- 1
- 783
-
by ShawnAgne
Tue May 23, 2023 8:28 pm
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 2 guests