This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Generator oil port problem 1950 Farmall H

Farmall H, HV & Super H, 300 & 350, 1939-1958
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
poppy1948
10+ Years
10+ Years
Posts: 25
Joined: Mon May 12, 2008 9:03 am
Zip Code: 45693
Tractors Owned: 1948 Cub
1982 JD 750
1956 INTERNATIONAL 350u
1950 Farmall H
Location: SW Ohio

Generator oil port problem 1950 Farmall H

Postby poppy1948 » Tue May 03, 2011 6:11 pm

So I ordered and received an operators manual for the H and decided to remove the hood and check on a few things on this "factory correct" beast.

Image

The new paint job is not too awful bad, but they certainly didn't do a perfect job.

Image

I started looking for lube spots and something didn't look right on the generator.

Image

The front oil port is on the wrong side. :shock:

Image

As a matter of fact, it's impossible to access. :x

Image

It even looks like the rear port is on the wrong side also, but at least it's accessible.

So, any red guys out there who have seen this before? If so what do I do about it? :?:

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:

Re: Generator oil port problem 1950 Farmall H

Postby Bigdog » Tue May 03, 2011 6:14 pm

Gently pry it up and drive it in the other side.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

poppy1948
10+ Years
10+ Years
Posts: 25
Joined: Mon May 12, 2008 9:03 am
Zip Code: 45693
Tractors Owned: 1948 Cub
1982 JD 750
1956 INTERNATIONAL 350u
1950 Farmall H
Location: SW Ohio

Re: Generator oil port problem 1950 Farmall H

Postby poppy1948 » Wed May 11, 2011 11:52 am

Thanks, Bigdog, I didn't think it would be that simple, but here's the result.

Image


Return to “Farmall H, HV, Super H, 300 & 350”

Who is online

Users browsing this forum: No registered users and 8 guests