Plywood Splitting Stands

Splitting stand, mounting stands, etc, etc.

Moderators: Barnyard, Team Cub

User avatar
frederick
5+ Years
5+ Years
Cub Star
Cub Star
Posts: 132
Joined: Wed Aug 11, 2010 12:19 am
Zip Code: 95125
Tractors Owned: 1951 cub hi-crop
Circle of Safety: Y
Location: san jose, california

Plywood Splitting Stands

Postby frederick » Tue Apr 12, 2011 7:49 pm

not a welder so I built my version of a "splitting stand" to support the front of the tractor while i dismember its front feet for paint and powdercoat. material is 11/16 exterior plywood glued and gusseted...shouldn't go anywhere. front jack stands were left in place until glue cures.

Image

The offset design makes for weird physics to get your head around when jacking up this little guy. Height of it is a real problem.

Image


Even with the wood wedges it just gave me the creeps so i strapped the rear axle to the stands with tie downs.

Image

Image

Frederick
I've fixed electrical problems with a hammer

Return to “Specialty tools”

Who is online

Users browsing this forum: No registered users and 0 guests