This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Help with changing bearings on a 3160 mower
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Help with changing bearings on a 3160 mower
I am looking for some help with how to change the bearings on a 3160 mower. I have the mower head disassembled. I was able to drive the shaft down out of the spindle. This freed up the top bearing and seal. I then drove the races out of the spindle top and bottom. No problem so far. But I am looking for ideas on how to drive the bearing closest to the blades off the shaft. No room to get any kind of punch under it to drive it up and off. Has anyone found a good way to do this without damaging the shaft? I would appreciate any suggestions. Thanks
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- 10+ Years
- Posts: 134
- Joined: Tue Aug 03, 2010 11:34 am
- Zip Code: 46975
Re: Help with changing bearings on a 3160 mower
Polish the shaft with a piece of emery cloth to get it nice and clean so the bearing will slip off easier. Might even want to go ahead and twist the cage off and get the rollers out of the way. Then heat it up some with a torch.
Once you get it off, look at the lower spacer that is/was below the bearing, it's what the lower seal rides on. If it's not rusted/pitted/grooved, leave it on there. Mine were bad and I made some using black pipe and turned them on a lathe.
Bearings & seals are available at most auto parts stores.
Once you get it off, look at the lower spacer that is/was below the bearing, it's what the lower seal rides on. If it's not rusted/pitted/grooved, leave it on there. Mine were bad and I made some using black pipe and turned them on a lathe.
Bearings & seals are available at most auto parts stores.
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Re: Help with changing bearings on a 3160 mower
Thanks for the help phazer, ends up when i pulled the center spindle out, the shaft is seperated from the blade head, someone has welded it in the past. But the good news is I think i found a new spindle assembly on ebay for a decent price. The first spindle i took off i ended up taking it to a local machine shop to have him remove the bearing, He cut it off with a die grinder I guess. But all looked good so its back together, So i figured what the heck pull the center spindle next cause it was the noisest anyways. Thats the one that has the broken or seperated blade head. I am afraid to pull the third one.
Anyways the first one cost me 20 bucks to the machine shope and $35 at NAPA for the bearings and seals. Dang expensive rebuild.
If anyone needs the numbers, the napa seals i got were napa part number 12437 $9.99 each, and the bearings were napa part number PBR14 $7.82 each.
Anyways the first one cost me 20 bucks to the machine shope and $35 at NAPA for the bearings and seals. Dang expensive rebuild.
If anyone needs the numbers, the napa seals i got were napa part number 12437 $9.99 each, and the bearings were napa part number PBR14 $7.82 each.
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- 10+ Years
- Posts: 134
- Joined: Tue Aug 03, 2010 11:34 am
- Zip Code: 46975
Re: Help with changing bearings on a 3160 mower
When I got my cub, the PO had hit something with the center blade and had also broken off the head/flange. It was a clean break and you could tell/feel exactly where it went back together. Welding shop fixed me up on that.
I mowed for an extended time with mine for the first time yesterday. I wouldn't really call it a finnish mower but it's good enough for the back 40. Had a hoot mowing.
I mowed for an extended time with mine for the first time yesterday. I wouldn't really call it a finnish mower but it's good enough for the back 40. Had a hoot mowing.
-
- 10+ Years
- Posts: 69
- Joined: Wed Apr 25, 2007 10:52 am
- Zip Code: 16218
- Location: Kittanning, PA
Re: Help with changing bearings on a 3160 mower
When I was a teenager, my first real full time summer job was mowing yards for a company that had a lot of property and we also mowed some of the stock holders yards. Much of my summers during college was spend riding a cub 154. It would take us all week to mow all the yard. I guess thats when I learned to enjoy the lo boy so much. It was a great mower then and I am hoping the 185 I picked up in march will be equally as great. About 4 years ago I picked up my 1962 international lo boy, I have been mowing with it since and it has been a great little tractor. But I always missed the live PTO on the numbered cubs.
Steve
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
1962 Cub Lo-boy restored w/60 woods deck and snow plow
1972 Standard Cub Original w/fast hitch w/snowplow
1975 Cub 185
1969 Cub 154 w/60" deck and snow plow
Fast hitch plow
42FH woods mower
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Looking for belt size for mower 3160 deck Attachment(s)
by Dan Stuckey » Tue May 31, 2022 8:32 pm » in Lo-Boy Series - 154, 184, 185 - 1
- 409
-
by indy61
Wed Jun 01, 2022 5:15 am
-
-
-
Crankshaft Main Bearings Attachment(s)
by outdoors4evr » Mon Dec 20, 2021 6:14 pm » in Lo-Boy Series - 154, 184, 185 - 9
- 749
-
by BigBill
Mon Jan 03, 2022 10:04 pm
-
-
-
will a woods mower off a 56 lo boy fit on a 154
by bob » Tue Apr 04, 2023 8:54 am » in Lo-Boy Series - 154, 184, 185 - 2
- 221
-
by SONNY
Wed Apr 05, 2023 1:48 pm
-
-
-
184 + junk mower Attachment(s)
by SONNY » Sat Dec 10, 2022 8:22 pm » in Lo-Boy Series - 154, 184, 185 - 10
- 558
-
by SONNY
Thu Jan 26, 2023 3:51 pm
-
-
- 6
- 441
-
by outdoors4evr
Fri Aug 12, 2022 5:22 am
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests