When setting the mixture on my '47 H, I can put the needle in to get a rough run on the lean side but after 1 1/2 turns out from seated, I can continue to turn out and it won't get too rich. It simply runs until the needle is removed completely. The packing isn't real snug.
It has a carb kit rebuild on it.
Is there a small passage in carb that has been overlooked? Is the loose needle packing affecting it? Are some of these so forgiving that over-rich doesn't change it much?
It sputters alittle at idle but runs smooth when throttled up or with any kind of load on it.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
H mixture issues
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 49
- Joined: Mon Jan 24, 2011 11:10 pm
- Zip Code: 21921
- Tractors Owned: .
49 Cub
47 H
39 JD B
48 Massey-Harris 22
Gravelys (gobs of 'em) - Circle of Safety: Y
- Location: Elkton, MD
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: H mixture issues
http://www.cleancomputes.com/Cub/Blue%2 ... System.htm
Above IH carburetors with pictures/sketches of internal plumbing/passages.
Edit: Thinking partially blocked passage in the idle system.
Above IH carburetors with pictures/sketches of internal plumbing/passages.
Edit: Thinking partially blocked passage in the idle system.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
Re: H mixture issues
Ya fix it??? Good carb kit or cheepie??? Kevin It does matter.
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
Return to “Farmall H, HV, Super H, 300 & 350”
Who is online
Users browsing this forum: No registered users and 0 guests