Thought I would post a couple pictures of the 2nd C (fake SC) It came with a set of 2 row cultivators.
It was a close fit on the trailer. Yes it was safe and secure. The strap is fastened into heavy tie downs welded to the frame of the trailer, and parallel with the center of the wheels. I also had several other straps cross tying and securing it. I would have preferred to get it further forward, but with the fenders could not. I opted for transferring weight out of the bed of the truck and putting it and the front sections of the cultivators as far forward on the trailer as possible. It balanced the trailer perfectly.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
the 2nd C (fake SC)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Don McCombs
- Team Cub Mentor
- Posts: 17486
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: the 2nd C (fake SC)
What's your plan for this one?
-
- 10+ Years
Re: the 2nd C (fake SC)
Well Don, I need to find a home for it, but am thinking I might part it out.
Jan wants me to keep the first one, because I like it so much and, if I put in a big corn plot, the 2 row cultivators will come in handy.
#1 has rear tires that hold air, and have good tread, but the sidewalls near the rim are peeling in places. #2's wheels and tires are in good shape, and need to be put on #1, if I plan to keep it.
Then we have the motor swap issue. They swapped motors from the A to the C and the C to the A. Same motor except the block on the C(out of the A), has no hydraulic ports. Also the pump and lines are missing.
Both motors have issues, which I have not investigated yet.
I would like to get the A functioning good, as there is more of a call for them here than the C.
So, if I swap the wheels from one C to the other, and keep the 3 pt hitch AND the 2 row cultivators, and leave the C motor on the A(block off the hydro port), that would leave me with a #2 C with a lot of good parts, but no hydraulics, and a #1 C in great original shape.
The only things I won't sell, are My Wife, My Dog, and the tractors and implements I have giiven to Jan(cause i can't sell her stuff)
I am always open to suggestions and offers.
Dale
I need to do some investigating on the #2 C. It has no serial # tag, BUT, I need to look closer for white paint. If the letter codes are the same as for Cubs, It falls into the range I believe. It's date code is 1-25-S
Jan wants me to keep the first one, because I like it so much and, if I put in a big corn plot, the 2 row cultivators will come in handy.
#1 has rear tires that hold air, and have good tread, but the sidewalls near the rim are peeling in places. #2's wheels and tires are in good shape, and need to be put on #1, if I plan to keep it.
Then we have the motor swap issue. They swapped motors from the A to the C and the C to the A. Same motor except the block on the C(out of the A), has no hydraulic ports. Also the pump and lines are missing.
Both motors have issues, which I have not investigated yet.
I would like to get the A functioning good, as there is more of a call for them here than the C.
So, if I swap the wheels from one C to the other, and keep the 3 pt hitch AND the 2 row cultivators, and leave the C motor on the A(block off the hydro port), that would leave me with a #2 C with a lot of good parts, but no hydraulics, and a #1 C in great original shape.
The only things I won't sell, are My Wife, My Dog, and the tractors and implements I have giiven to Jan(cause i can't sell her stuff)
I am always open to suggestions and offers.
Dale
I need to do some investigating on the #2 C. It has no serial # tag, BUT, I need to look closer for white paint. If the letter codes are the same as for Cubs, It falls into the range I believe. It's date code is 1-25-S
-
- Team Cub Guide
- Posts: 3544
- Joined: Sun Feb 02, 2003 6:30 pm
- Zip Code: 38658
- eBay ID: Cub-Bud
- Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
- Circle of Safety: Y
- Location: MS, Pope
Re: the 2nd C (fake SC)
"Then we have the motor swap issue. They swapped motors from the A to the C and the C to the A. Same motor except the block on the C(out of the A), has no hydraulic ports. Also the pump and lines are missing.".
I'm interested in the C, but given the above situation, it will not be much use if the hydrualics are inoperable.
I'm interested in the C, but given the above situation, it will not be much use if the hydrualics are inoperable.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"
Greg Norman
Greg Norman
-
- 10+ Years
Re: the 2nd C (fake SC)
Bud, I am all for swapping the C block back into it., then it would just need the Hyd pump and lines.
I have a spare good block for the A motor, so taking the C motor off from it and swapping back, is just a matter of doing it. The po said the C motor was working good, and while he was mowing, started making a lot of noise. He seems to think the crank may be broken, but did not investigate. I also have a good crank for the C motor. Just needs polished.
When are youcoming to get it?
Dale
I have a spare good block for the A motor, so taking the C motor off from it and swapping back, is just a matter of doing it. The po said the C motor was working good, and while he was mowing, started making a lot of noise. He seems to think the crank may be broken, but did not investigate. I also have a good crank for the C motor. Just needs polished.
When are youcoming to get it?
Dale
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 11 guests