I've been plowing snow at the farm with the 130 for the last three years. But its kinda a pain. It has the 60" blade but with the 14.9x24 tires the back of the tractor is 72" wide so the snow coming off the blade leaves a pile in the center of the rear tire and I loose traction. My friend Scott came over and was watching me plow and said next time I go home take it off and he will widen it. The next day he comes over as said you wouldn't believe what I just found. He found a 7' blade. He said he doesn't know if it will push it but we can cut it down latter if we have to. I need to get a cutting edge for it. But I need new one for the dozer so I may get one for it and use the old one for the 130.
Here it is with the old blade
I finally got tire chains for it this year. And I got them just in time they were $262 for the pair and a week later they went to $262 pr. Sure made a big difference. I am plowing a good 3/8 of a mile of road plus the parking at the trailer barn and shed.
Billy
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
130 going to get a new blade
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
130 going to get a new blade
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Re: 130 going to get a new blade
Looks good Bill. Some of our friends down south could use your help.
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
Re: 130 going to get a new blade
Nice set up-----I still want a Super C at my place!!!Kevin
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
- 10+ Years
- Posts: 3414
- Joined: Sat May 15, 2004 11:10 am
- Zip Code: 49229
- Location: MI, Britton
Re: 130 going to get a new blade
Thanks Bill
Its crazy they are getting more snow than I am
Thanks Kevin
You'll find one. The bigger tractors are a lot of fun
Billy
Its crazy they are getting more snow than I am
Thanks Kevin
You'll find one. The bigger tractors are a lot of fun
Billy
Take care of your equipment and it will take care of you. 1964 cub. Farmall 100 and 130.
"Those that say it can’t be done should not interrupt the ones who are doing it.”
"Those that say it can’t be done should not interrupt the ones who are doing it.”
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 430
-
by Gary Dotson
Mon Jul 26, 2021 6:55 am
-
- 10
- 1094
-
by SONNY
Thu May 25, 2023 10:06 pm
-
- 5
- 405
-
by inairam
Sun Nov 28, 2021 8:07 am
-
-
A60 Blade question
by ShawnAgne » Sun Jan 07, 2024 7:31 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 815
-
by Lt.Mike
Wed Jan 31, 2024 4:49 pm
-
-
- 5
- 351
-
by ShawnAgne
Mon Jan 24, 2022 7:49 am
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest