This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
M
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Mr E
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
- Contact:
Re: M
DanR wrote:Does anyone have a picture of the radiator shutter linkage on an M? Thanks
Dan, I have an H with shutters. Do you know if the linkage is similar? If so, I'll be happy to get you some pictures of that.
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
- dirtyred
- 10+ Years
- Posts: 1414
- Joined: Sun Aug 02, 2009 11:52 am
- Zip Code: 31648
- Tractors Owned: 1949 farmall cub (tinkerbell) 1949 allis chalmers(ole bess) 1949-50 ?john deere model a
- Location: statenville ga
Re: M
which end do you need a pic of?
He that tilleth his land shall be satisfied with bread: Proverbs 12:11
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: M
I think I have it figured out. Problem was every piece is bent, broken, or modified. This application is not typical IH. Things like cotter pins backwards and moving the water pump because one piece is 1/8" too long. Must have been engineered by someone from the other side.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: M
Dan
I have a shutter stystem on our M.
Let me know what you need,
Phil
I have a shutter stystem on our M.
Let me know what you need,
Phil
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: M
Thanks Phil, I'm going to make a new long rod today. The old one has too many bends to be straightened properly. I'll know better after I get that in.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
Re: M
Just a heads up it has a drop of 3 inches and an offset of 1 inch.
5/16 rod
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Phil
5/16 rod
The travel for the threads is 3/4 inch to open and shut the shutters.
Things i have found to make the new offset rod that attaches to the crank
Phil
"Work Hard ,Play Often,Care Always"
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 1 guest