Of all things to go wrong on my super C all the teeth were stripped from my
oiler gear. Its on the shaft with all the speed gears. I've read everything in
my shop manual and its not making a lot of since to me. I do know that I have to
break it in half at the gear housing. I haven't found anything that is clear on
how to disconnect the drive shaft there and I don't want to guess and make a
mess of it. Also its not clear on how to get the gear out. Once place I read
said that I have to remove the top (sliding) gears through the top of the
housing and then remove the lower speed gears, which means loosening the
differential and removing the rivet at the back of the top shaft. I thought that
I had read that the gear could shaft could be slid out the front of the housing
and and the gears taken off that way. I'm in the middle of planting my food
plots and have to get this done right away. Is there anyone out there that can
help me with some much needed advice?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need Emergency advice from Super C Guru
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3
- Joined: Tue Oct 12, 2010 8:39 am
- Zip Code: 30549
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: Need Emergency advice from Super C Guru
If you haven't already done so you may want to post this on the Farmall forum on the ytmag site. There are lots of Farmall experts there who are quite active.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 3
- Joined: Tue Oct 12, 2010 8:39 am
- Zip Code: 30549
Re: Need Emergency advice from Super C Guru
ytmag site? I haven't heard of it. Where do I find it?
Thanks,
Jeff
Thanks,
Jeff
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: Need Emergency advice from Super C Guru
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 3
- Joined: Tue Oct 12, 2010 8:39 am
- Zip Code: 30549
Re: Need Emergency advice from Super C Guru
Got it and posted. Thanks
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 10 guests