This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
howdy from california
-
- 10+ Years
- Posts: 132
- Joined: Wed Aug 11, 2010 12:19 am
- Zip Code: 95125
- Tractors Owned: 1951 cub hi-crop
- Circle of Safety: Y
- Location: san jose, california
howdy from california
though growing up on a small family orchard i'm a city boy, loved these little tractors all my life and vowed to find one to bring back to life. serendiptiously a '51 hi-crop came up on the local craig's at the exact same hour and the exact same price as a concours honda ct90 i restored sold. that's a sign if i ever saw one. not to mention coming out way ahead weight wise.
the cub runs but it needs some tlc. being a california cub its probably in better shape than most, but even so the short while i've had it i've learned all about the rust mushrooms that 60 year old nuts and bolts become. my manuals came today so i can start on the basics... gaskets, fluids and see where i'm at with all the mechanicals before i tear down for any major repairs and final finishes.
i do have one question and that's the shape of the unobtanium new seat support tube (part # 351 883 R11). pix attached of mine...is that the shape they are supposed to be? i couldn't find any close-ups in the photo sections.
anyway, thanks for letting me in here. this is a fabulous resource with, from lurking the last couple weeks, some great people participating. almost every single question that has cropped up i've found myriad answers to with a couple clicks of the mouse. it's amazing how much information is archived here, the wisdom and knowledge amassed is incredible. and the site sponsors have been wonderful, shipping on time and honest to a fault.
frederick
the cub runs but it needs some tlc. being a california cub its probably in better shape than most, but even so the short while i've had it i've learned all about the rust mushrooms that 60 year old nuts and bolts become. my manuals came today so i can start on the basics... gaskets, fluids and see where i'm at with all the mechanicals before i tear down for any major repairs and final finishes.
i do have one question and that's the shape of the unobtanium new seat support tube (part # 351 883 R11). pix attached of mine...is that the shape they are supposed to be? i couldn't find any close-ups in the photo sections.
anyway, thanks for letting me in here. this is a fabulous resource with, from lurking the last couple weeks, some great people participating. almost every single question that has cropped up i've found myriad answers to with a couple clicks of the mouse. it's amazing how much information is archived here, the wisdom and knowledge amassed is incredible. and the site sponsors have been wonderful, shipping on time and honest to a fault.
frederick
I've fixed electrical problems with a hammer
-
- Team Cub
- Posts: 9533
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: howdy from california
Frederick,
Welcome to the forum. Enjoy your Cub. Yes, your seat post is fine.
Bill
Welcome to the forum. Enjoy your Cub. Yes, your seat post is fine.
Bill
-
- 10+ Years
- Posts: 1968
- Joined: Fri Dec 26, 2008 9:28 pm
- Zip Code: 93313
- Location: CA, Bakersfield
Re: howdy from california
Welcome from another Calif cubber I too am a city boy with TWO cubs in my garage....I like yours.
Robert (in Bakersfield) Miller
Robert (in Bakersfield) Miller
-
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
Re: howdy from california
Robert... his high wheels on your WIDE Cub... that would be NEAT!
Mike in La Crosse, WI
Mike in La Crosse, WI
-
- Cub Pro
- Posts: 5238
- Joined: Sat Sep 08, 2007 3:49 pm
- Zip Code: 25271
- eBay ID: yogiefisher
- Tractors Owned: 37 John Deere A
63 Farmall Cub
53 Farmall Cub
56 Farmall Cub
IH 140
Massey 165 & 250 - Circle of Safety: Y
- Location: WV. Ripley
Re: howdy from california
Welcome, like Bill said your seat post is fine and not rusted out as they usually are. There's a tool box that fits in the front covering the mounting section. Water usually lays in there and causes problems down the road.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Ben Franklin
-
- 10+ Years
- Posts: 1087
- Joined: Sun Apr 18, 2010 6:22 am
- Zip Code: 21742
- Tractors Owned: 1955 F Cub (2)
1952 F Cub
1948 F Cub
2155 JD
216 JD - Circle of Safety: Y
- Location: Hagerstown MD
Re: howdy from california
Robert,
Welcome. Those shiny bolts holding your seat down are not normal. I say that because most are severely rusted in place and present a major challenge to remove. These new bolts are a good sign that maybe the previous owner has already done some restoration work. Note that the seat bracket has an extra hole which allows you to move the bracket back if you would like more room on the operator platform.
Welcome. Those shiny bolts holding your seat down are not normal. I say that because most are severely rusted in place and present a major challenge to remove. These new bolts are a good sign that maybe the previous owner has already done some restoration work. Note that the seat bracket has an extra hole which allows you to move the bracket back if you would like more room on the operator platform.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: howdy from california
Frederick:
Nice Cub and congrats on acquiring your very 1st Cub. You'll notice I said very first these things are very addictive and many of us have succumbed to the MCC contagion Enjoy your Cub. Nice Hi-Clear.
Nice Cub and congrats on acquiring your very 1st Cub. You'll notice I said very first these things are very addictive and many of us have succumbed to the MCC contagion Enjoy your Cub. Nice Hi-Clear.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 132
- Joined: Wed Aug 11, 2010 12:19 am
- Zip Code: 95125
- Tractors Owned: 1951 cub hi-crop
- Circle of Safety: Y
- Location: san jose, california
Re: howdy from california
thanks for the welcome all...so technically it's called a "hi-clear"? i like that other designation..."crop-vision"...sounds so visionary . everything about these little tractors is fascinating. as a designer, it was cool to learn the letter series including the cub were designed by the most famous designer of all: http://en.wikipedia.org/wiki/Raymond_Loewy
@ robert
the new bolts are mine...the rust mushrooms those replaced are what i had the joy of removing. and those hourglass bends in the gussets are normal?
the toolbox when and if i find one will indeed cover it up, i was just curious.
one last newbie question and i'll slide back into lurk mode: where do you folks go for basic parts...oil filters, gaskets, seals, belts, carb rebuild kit, etc....tm?
frederick
@ robert
the new bolts are mine...the rust mushrooms those replaced are what i had the joy of removing. and those hourglass bends in the gussets are normal?
the toolbox when and if i find one will indeed cover it up, i was just curious.
one last newbie question and i'll slide back into lurk mode: where do you folks go for basic parts...oil filters, gaskets, seals, belts, carb rebuild kit, etc....tm?
frederick
I've fixed electrical problems with a hammer
-
- Cub Pro
- Posts: 5238
- Joined: Sat Sep 08, 2007 3:49 pm
- Zip Code: 25271
- eBay ID: yogiefisher
- Tractors Owned: 37 John Deere A
63 Farmall Cub
53 Farmall Cub
56 Farmall Cub
IH 140
Massey 165 & 250 - Circle of Safety: Y
- Location: WV. Ripley
Re: howdy from california
Yes, TM is a good source for about anything. You can also ask and we'll help you find things through your local parts store, such as seals, bearings, filters and such.
Ralph's web site on the home page is a good place to find your tool box.
Ralph's web site on the home page is a good place to find your tool box.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Ben Franklin
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: howdy from california
Frederick:
Nope the bracket is not supposed to be distorted quite like that. There is a bit of a bend in the side walls of the bracket though.
This is what the bracket normally looks like. Remember these are usually between 50 and 60 years old.. sooooo there is bound to be some distortion.
Pics courtesy TM Tractor
TM has a reproduction tool box as well if originality is not necessary.
Replacement Pan Seat Tool Box
Please do continue to post including your progress on your Cub and of course post pics... we like pics
Nope the bracket is not supposed to be distorted quite like that. There is a bit of a bend in the side walls of the bracket though.
This is what the bracket normally looks like. Remember these are usually between 50 and 60 years old.. sooooo there is bound to be some distortion.
Pics courtesy TM Tractor
TM has a reproduction tool box as well if originality is not necessary.
Replacement Pan Seat Tool Box
Please do continue to post including your progress on your Cub and of course post pics... we like pics
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 371
- Joined: Mon Feb 03, 2003 1:05 pm
- Zip Code: 93636
- Tractors Owned: 1947 Cub #550
1962 LoBoy - Circle of Safety: Y
- Location: Madera, CA.
Re: howdy from california
Welcome from another Calif. Cub guy! Steve K.
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Re: howdy from california
Welcome to the forum. Don't go back to lurking, please. Your tractor looks to be a High-Wide, a special iteration of the Cub.
For basic parts like oil filters and oil, I usually start with Autozone, then check with Napa. They both have OEM parts cross references. If you need a carb kit, definitely go to TM - cheap aftermarket carb kits don't work. Also, if you are going to do a tune-up, the TM "kit" is about the same price as an new cap from Napa.
For basic parts like oil filters and oil, I usually start with Autozone, then check with Napa. They both have OEM parts cross references. If you need a carb kit, definitely go to TM - cheap aftermarket carb kits don't work. Also, if you are going to do a tune-up, the TM "kit" is about the same price as an new cap from Napa.
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
-
- 10+ Years
- Posts: 840
- Joined: Tue Mar 23, 2010 11:00 pm
- Zip Code: 04236
- Tractors Owned: '49 Cub "Jessie"
'64 Cub "Alex" - Circle of Safety: Y
- Location: Maine
Re: howdy from california
Welcome, Frederick. Love the high crop. Enjoy.
Jeff
Jeff
'49 Cub (#77786) "Jessie"
"64 Farmall Cub (#224657) "Alex"
Woods 42C-6
C-3 mower
Cub 54 Blade
193 Moldboard plow
Cub L-38 disc harrow
Cub-144 Cultivator
Cordwood Saw
"64 Farmall Cub (#224657) "Alex"
Woods 42C-6
C-3 mower
Cub 54 Blade
193 Moldboard plow
Cub L-38 disc harrow
Cub-144 Cultivator
Cordwood Saw
-
- 10+ Years
- Posts: 187
- Joined: Mon Jul 03, 2006 8:00 pm
- Zip Code: 95993
- Tractors Owned: Allis challmers 720
1950 Cub
1950 Cub Demo
1958 International Cub
Lo-boy
1963 International Cub Lo-Boy
& Cub implements - Location: Ca. Yuba City, 95993
Re: howdy from california
Welcome aboard. From another Ca. Cub guy.
This fourm is nothing but a learning experience.
Even more so if you own a Cub. Put your questions
on the fourm. Answers generally are returned before
you can complete the question. Well almost.
This fourm is nothing but a learning experience.
Even more so if you own a Cub. Put your questions
on the fourm. Answers generally are returned before
you can complete the question. Well almost.
1- 1950 cub
1- 1950 cub demonstrator
1- 1958 International cub lo-boy
1- Allis Chalmers 720
1- 1950 cub demonstrator
1- 1958 International cub lo-boy
1- Allis Chalmers 720
-
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: howdy from california
The smaller front bolt in your seat post is in a hole originally intended for the bolt mounting the tool box. That bolt, as best I remember is 3/8-24, NF thread. Those original threads in that hole may be ruined.
Luck favors those who are prepared
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 0 guests