$$
Moderator: Team Cub
12 posts
• Page 1 of 1
$$
by DanR » Tue Jun 15, 2010 5:36 am
Would you buy an M and a Super M for $1000? Both stuck been sitting outdoors for 7 years. Am I crazy?
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1611
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: $$
by John *.?-!.* cub owner » Tue Jun 15, 2010 7:59 am
It depends on your wants/needs, financial conditions, and shop capabilities, but the price is reasonable. if the exhaust is uncovered figure on piston and sleeve kits, and probably heads. If exhausts are covered the problems probably will not be so extreme.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17786
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Re: $$
by KETCHAM » Wed Jun 16, 2010 11:34 am
They both run?????? good deal if they do. 
Kevin
Kevin47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
KETCHAM - 501 Club
- Posts: 5453
- Joined: Thu Jul 28, 2005 2:37 pm
- Location: Marshallville Ohio
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
Re: $$
by Bezirk » Thu Jun 17, 2010 6:43 am
Dan:
I would evaluate the entire machines, tires, sheet metal ETC and if those parts are reasonably good I would purchase them, after giving the( "poorer than church mouse") routine to see if I could get a better price. You can hopefully make most of one out of the both of them and sell some parts to help with expenses. That's my 02. worth.
Berlin
I would evaluate the entire machines, tires, sheet metal ETC and if those parts are reasonably good I would purchase them, after giving the( "poorer than church mouse") routine to see if I could get a better price. You can hopefully make most of one out of the both of them and sell some parts to help with expenses. That's my 02. worth.
Berlin
I seem to know more and more about less and less, soon I'll know everything about nothing !
-
Bezirk - 501 Club
- Posts: 1001
- Joined: Fri Mar 27, 2009 10:07 pm
- Zip Code: 22843
- Tractors Owned: Farmall Cub 1949, Oliver OC3 crawler 1951, Ford 8 N 1948, Oliver 77 Row Crop 1953, JohnDeere, La, 1941, John Deere 4115/w loader, 2004, John Deere stationary power unit LUC, Farmall M, 1946, Oliver 77 Row crop w/ loader
- Circle of Safety: Y
Re: $$
by DanR » Thu Jun 17, 2010 7:49 am
I'm going down to look at them Saturday. I'm getting conflicting specs on the width. One says 70" and another says 84" It would be nice to know before hand. Anyone got an M?
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1611
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: $$
by Super A » Thu Jun 17, 2010 8:12 am
All depends on the rear tread setting. I bet they are somewhere in between 70" and 84" from center to center of each rear tire.
That works out to $500 apiece. I would negotiate for a better price, but if they are straight and all there, I am not sure it's SUCH a bad deal. Not a steal, but not a ripoff. I'd probably give that for a pair of nice straight non-running Cubs.
Al
That works out to $500 apiece. I would negotiate for a better price, but if they are straight and all there, I am not sure it's SUCH a bad deal. Not a steal, but not a ripoff. I'd probably give that for a pair of nice straight non-running Cubs.
Al
"12 volt conversions are for quitters"
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
IH's are RED. Just say NO to yellow and white!
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
-
Super A - 501 Club
- Posts: 3035
- Joined: Mon Jan 26, 2004 10:53 am
- Location: NC, Jacksonville area
- Zip Code: 28521
- Tractors Owned: 1949 Cub "The Paperweight"
Cub powered IH 52R combine
Grandfather's 1948 Super A
White demo Super A-"Ol Whitey"
1950 Super A "Old Ugly"
1954 Super A-1
856
Buncha other junk - Circle of Safety: Y
Re: $$
by DanR » Sun Jun 20, 2010 5:51 am
Update: I found the M's. The M back tires are shot fronts unknown. It has a complete sickle mower on it with Lift All attached. Antifreeze in the radiator and black oil in the pan. Some rust but it's all there. The Super M is completely overgrown with vines etc. Looks like the tires may have some air in them and the rears are usable. Nothing showing in the radiator. I drained about 2 quarts of clear water from the pan before the dirty oil. Original lights and tool box on the SM. None on the M. I could not get to the back of the SM for the overgrowth. It would take a big winch to get both of them up to the road. Oh yeah both exhaust pipes are covered. The cost of getting and delivering them 150 miles away will make the decision. PS the SM has live hydraulics and both have mags.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
- DanR
- 501 Club
- Posts: 1611
- Joined: Fri Dec 22, 2006 6:28 am
- Location: Tennessee East
- Zip Code: 37743
- Circle of Safety: Y
Re: $$
by Mr E » Sun Jun 20, 2010 6:20 am
DanR wrote:I'm going down to look at them Saturday. I'm getting conflicting specs on the width. One says 70" and another says 84" It would be nice to know before hand. Anyone got an M?
Dan,
Just got a SM from Denny. It was set out to 92 1/2 from outside the rears. That required an 8' trailer to tow.
For what it's worth.
In the middle of every difficulty lies opportunity. - Albert Einstein
Roy Edenfield
Deep South CubFest
February 14 & 15, 2014
Roy Edenfield
Deep South CubFest
February 14 & 15, 2014
-
Mr E - 501 Club
- Posts: 4858
- Joined: Mon Jul 30, 2007 11:48 am
- Location: FL, Sneads
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
Re: $$
by John *.?-!.* cub owner » Sun Jun 20, 2010 5:46 pm
Dan, you just upped the repair cost. New rear tires for M or Super M will run $350 and up per tire.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17786
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
12 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests
|
|