We all have been their. Nice day we go pinicing put the table cloth on the table to keep everything clean from other things to us. We get the food out, get our plates full then the wind pick's up or someone move's the table cloth & their goes our plate's we say darn wind or someone's name. Well here's a way to keep that from happening CHEAP.
Start out with a 2" peice of PVC. I made all mine 1" wide. They work just right. But each to their own. Good Luck.
Cut to 1".
Burr's. Make sure you have leather glove's when deburring. TRUST ME. It hurt's if you don't.
Make sure you make a smooth edge on the inside of the clamp. That way it won't tear your cloth or anything thin.
Any size you want. The thinner the table the thinner the clamp.
Two different size's.
If you cut at an angle cut the thin part out to make the opening. That way you have the wider part on the outside. Less stress to break. You just have to be creative.
Enjoy.
Be SAFE.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Table cloth clamps
-
- Team Cub Mentor
- Posts: 4914
- Joined: Tue Jun 07, 2005 2:30 pm
- Zip Code: 46055
- Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines - Circle of Safety: Y
- Location: IN, McCordsville
Table cloth clamps
In my line of work
" EVERYBODY GOES HOME THE NEXT MORNING"
" EVERYBODY GOES HOME THE NEXT MORNING"
-
- Similar Topics
- Replies
- Views
- Last post
-
-
list or table of all of the IH Carb part numbers?
by inairam » Mon Jun 27, 2022 1:15 pm » in Farmall Cub - 0
- 96
-
by inairam
Mon Jun 27, 2022 1:15 pm
-
Return to “Miscellaneous Ideas”
Who is online
Users browsing this forum: No registered users and 1 guest