This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall Front Hitch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
Farmall Front Hitch
Over the past year I've come to realize the value of a front mounted hitch. I put one on my truck, the Cub and now the H. My first attempt on the H ended in a big surprise at how easily I broke the lower bolster ( that lowered ball mount was not on at the time I broke it- it was broke from a straight out pull reference 1st pic). After that event I wondered about how strong that lower bolster really is as many guys trailer their tractors with a strap from that point. In fact many people sell a thing to bolt on there for that purpose. The next pic shows my improved version that I feel more confident will hold up. The upper bolster is beefy with 4ea. 3/4" bolt holes already there. The angle is 3/8" 2x2 with a 1/2' plate welded on top. The drop mount gets me down level with wagons and trailers. Also by having a receiver up front the possibilities are endless as to what else I can adapt to the front, Weight bar, front mount sprayer,ect. Last Sunday I used the hitch to move some wagons around and you can thread a needle with a wagon on the front. Beats all the cuusing I do with a wagon on the back.
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Never used one to pull the tractor, but used one for years for backing wagons and such in tight spots, really was handy unless the ground was soft, then you really needed power steering. As a side note, I would not reccomend towing the older tractors more than 20 mph max.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- 10+ Years
- Posts: 1300
- Joined: Tue Nov 23, 2004 7:21 pm
- Zip Code: 24095
- Tractors Owned: '49 Cub
'49 JD "B"
'79 JD 2040
'50 DB "Garden Tractor"
'52 DB "Super Power"
'56 DB "Big 5"
'62 DB "Super 600"
'37 McCormick Deering "LA" engine - Location: Stewartsville, Virginia
-
- 10+ Years
Do you have any pics of the cub hitch that you made?
I don't have anything all that good so I'll take a pic or 2 this weekend. Tha Cub hitch is actually part of a snow frame after the blade is removed. I had (last winter) a custom front blade assembly made by a local fab shop. Got more in it that I do the Cub by far. It has power up-down and power angle. The hole blade is somewhat based off a Myeres truck plow. The angle cylinders ( not in pic) were ordered from Myers. The pic I'm posting is before it was finished and the receiver wasn't yet on.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Now I have another question. Did you tap into the Cub system for hydraulics and if you did, does the Cub system handle the 3 cylinders as far as volumn of fluid or did you need some other holding tank? The reason I'm asking is because I'm putting a dual control valve on a Cub with a rear 3 point(with it's own cylinder) to mount a rear scraper blade and I want a front cylinder to angle the snow blade. Looks like a neat set-up. Bet you have fun with that when it snows.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
If he pre fills everything and refills a couple of times with the first few operations he can probably get away with no resivour. What do you think??? Gosh i spell horribly.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Dennis is it possible to add a spell checker for when we know we are wrong but don't know how to fix it?? I would give an arm and a leg not to look so foolish some times.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
-
- 10+ Years
The Cub as of yet is untested as I tore it down right after the plow was complete. Thats a bad habit of mine, tearing things down and then moving on before finishing. Actually my wife is to blame ( hope she doesn't read this ) because last year when I begged her for a new tractor she flat said no,no,n-o. She said I've got 4 tractors, pick one and fix it! Thats as much as I got, of course I did fix one you know, I picked the H. What she didn't realize was how much I was going to put into it to really get the tractor I was after. I back doored her . About $5,000 later WALA new tractor!! . What I'm trying to say is the hydraulic package was built and has been tested on the H. It works great!! Now on the Cub if you stay with double acting cylinders you can add as many as you like ( no oil penilty). Its those single acting buggers that will rob your reservoir. The valve on the Cub is the same one I used on the H a 3 spool cross with float on the 1st and load checking on all. Here is a couple of pics of the H system.
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
If you have all double acting cylinders all operating in the extend mode as opposed to the retract mode, you have a drop in fluid level because of the area taken up by the piston itself. If I have the 3 point cylinder up, the front blade angled right and the touch control cylinder out, the level will drop. How much is my concern. It's not an even fluid transfer. The Cub fluid capacity isn't that big, that's why I was worried about this. I guess your setup would be different because with the Meyers single acting cylinders on each side, it would be an exact even transfer. Mine will be 3 doubles in the system. My log splitter is a perfect example. If I extend the main cylinder all the way out to split and I have the hydraulic table in the up position, the fluid level drops about 1 inch. I guess if I get my calculator out and figure the areas of all the pistons together, that will give me a total amount.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
AAAAH, You are correct but the difference is pretty small such that the reservoir should handle the little bit. The angle cylinders are an even trade you are correct. The lift cylinder in my pic is only 2" if I remember right. No real penelty there. And of coarse the hole thing is predecated on being intermittent operation. Now the splitter is an alltogether different animal. I too built one that is all done but the hoses. It has a 30gpm pump and a 21 gal reservoir. I noticed last summer using my neibors splitter that the fluid can get real hot when the ambient is above 60F. So rather than put a cooler on I just made the reserve oil capacity bigger. If it still gets hot, well then I'll add the cooler. Now you know a person could bypass the touch control alltogether and actually simplify the hole thing. At that point it would just like my H system just scaled down a bit. Just mount a tank where the touch control is and put the valve next to the seat. My valve does mount next to the seat upside down with the handles reversed. Very comfortable to operate. the H valves are nice because when you are hooking up standing in the rear you've got them right within easy reach. I probably use them off as much as on.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 445
-
by ajhbike
Mon Jun 14, 2021 4:01 am
-
- 2
- 236
-
by tldec50
Mon May 09, 2022 7:43 pm
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 2 guests