Today these engines made their way to the Zagray Farm to complete the acquisition phase of this project. Marino Crane Service not only provided the DMAG for the lifts, but performed the rigging and the low-boys for the move. they are being unloaded as we speak at the Zagray Farm Museum.
the 3 cylinder weighed 18 tons, and the 4 cylinder 22 tons with the flywheels attached.
We will now place a request with the Colchester Historical Society (our landlord) for $150,000 out of the Zagray endowment fund for building construction.
I'll post a picture tomorrow. SUCCESS
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Fairbanks Morse engines have been moved
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
Fairbanks Morse engines have been moved
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- artc
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
- Contact:
January 21, 2005 Unloading the 4 cylinder. in the background is an Allis HD11, a Hydrocrane on a Ford chassis, and our 80D Northwest.
There was a prediction that we would move them on the coldest day of the year. The temp at the time this afternoon photo was taken was a balmy +6 degrees F. Saturday morning we oiled the main bearings, sprayed a oil/diesel mix all over the exterior, and covered them to withstand the 40 MPH winds expected for Sunday with 1 to 2 feet of snow.
Hope it stayed on! The wind sure did blow.
There was a prediction that we would move them on the coldest day of the year. The temp at the time this afternoon photo was taken was a balmy +6 degrees F. Saturday morning we oiled the main bearings, sprayed a oil/diesel mix all over the exterior, and covered them to withstand the 40 MPH winds expected for Sunday with 1 to 2 feet of snow.
Hope it stayed on! The wind sure did blow.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Lookin' good Art!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 7 guests