This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
BN pressure plate
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1776
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
BN pressure plate
My wife volunteered me into changing a clutch in one of her one of workmates BN tractor. Do I have to adjust the fingers on the pp like you have to the Cubs? I have changed a lot of clutches and pp pn many lift trucks, and industrial equiptment and never heard of adjusting the pp fingers as you do for the Cub
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
- 10+ Years
- Posts: 173
- Joined: Fri Nov 16, 2007 4:14 pm
- Zip Code: 51646
- Location: New Market, Iowa
- Contact:
Re: BN pressure plate
I've changed out a lot of clutches in my life and have never needed to adjust the pressure plate fingers on any of them. All of them were ready to go right out of the box.
Who is online
Users browsing this forum: No registered users and 1 guest