This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

H4 magneto question

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Tractorboy3
10+ Years
10+ Years
Posts: 183
Joined: Thu Jan 29, 2009 9:54 pm
Zip Code: 20707
Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440
Circle of Safety: Y
Location: Laurel, Md

H4 magneto question

Postby Tractorboy3 » Sat Aug 15, 2009 8:52 pm

Hi there, \
I have a broken housing on an H4 magneto. I have another housing to use, but I cannot get the impulse coupler off. I tried to fabricate a puller out of a 9/16, 18 TPI bolt. But the thread inside the coupler must be 19 or 20 ?? TPI. An unusual size. Does anyone know were I could purchase a puller to get this thing off??
Thanks so much for any help...Tom :(
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440

SPONSOR AD

Sponsor



Sponsor
 

User avatar
RaymondDurban
Cub Pro
Cub Pro
Posts: 4435
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: H4 magneto question

Postby RaymondDurban » Sat Aug 15, 2009 8:55 pm

John *.?-!.* cub owner, a member here on the forum has a friend that makes them. I'm sure he'll be along shortly with the info.

User avatar
RaymondDurban
Cub Pro
Cub Pro
Posts: 4435
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: H4 magneto question

Postby RaymondDurban » Sat Aug 15, 2009 9:12 pm

Tom, just found out that the fella that made them sold out. PM me your address and I'll send you mine to use.

User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: H4 magneto question

Postby John *.?-!.* cub owner » Sat Aug 15, 2009 9:15 pm

The man that made them for me, will only make them If I can get an order for several. So it will be a while. I believe WK was thinking about getting some made, but not sure.
If you are not part of the solution,
you are part of the problem!!!

User avatar
Tractorboy3
10+ Years
10+ Years
Posts: 183
Joined: Thu Jan 29, 2009 9:54 pm
Zip Code: 20707
Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440
Circle of Safety: Y
Location: Laurel, Md

Re: H4 magneto question

Postby Tractorboy3 » Sat Aug 15, 2009 9:19 pm

Thanks so much....Put me down for a standing order for one..
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440

User avatar
Tractorboy3
10+ Years
10+ Years
Posts: 183
Joined: Thu Jan 29, 2009 9:54 pm
Zip Code: 20707
Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440
Circle of Safety: Y
Location: Laurel, Md

Re: H4 magneto question

Postby Tractorboy3 » Sat Aug 15, 2009 9:20 pm

Screwstick wrote:Tom, just found out that the fella that made them sold out. PM me your address and I'll send you mine to use.


Thank you so much...PM sent....Tom :D :D :D
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440

WKPoor
10+ Years
10+ Years

Re: H4 magneto question

Postby WKPoor » Sat Aug 15, 2009 10:45 pm

Earl has at least a dozen made and ready to go. 740-969-2927 25.00 to include shipping

User avatar
Tractorboy3
10+ Years
10+ Years
Posts: 183
Joined: Thu Jan 29, 2009 9:54 pm
Zip Code: 20707
Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440
Circle of Safety: Y
Location: Laurel, Md

Re: H4 magneto question

Postby Tractorboy3 » Sat Aug 15, 2009 11:12 pm

WKPoor wrote:Earl has at least a dozen made and ready to go. 740-969-2927 25.00 to include shipping


Thanks...going to call tomorrow :D
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440

User avatar
Tractorboy3
10+ Years
10+ Years
Posts: 183
Joined: Thu Jan 29, 2009 9:54 pm
Zip Code: 20707
Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440
Circle of Safety: Y
Location: Laurel, Md

Re: H4 magneto question

Postby Tractorboy3 » Thu Aug 20, 2009 8:55 pm

Wow..got the puller today. Professional quality, A1 Craftsmanship, Grade 8 bolt. If you were on the fence about ordering one of these from Earl, don"t hesitate. This tool is well worth $25. Thank you ...Tom
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440

User avatar
RaymondDurban
Cub Pro
Cub Pro
Posts: 4435
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: H4 magneto question

Postby RaymondDurban » Thu Aug 20, 2009 8:59 pm

Tom, I was just about to send you a message to see if everything worked out with Earl, and looks like it did. The puller makes a world of difference when working on the Mag. Makes a hard job easy! Glad it worked out.

User avatar
Tractorboy3
10+ Years
10+ Years
Posts: 183
Joined: Thu Jan 29, 2009 9:54 pm
Zip Code: 20707
Tractors Owned: ........
1950 H
1952 Super C
1954 Cub
1957 Cub
1958 Cub
1995 Cub Cadet 1440
Circle of Safety: Y
Location: Laurel, Md

Re: H4 magneto question

Postby Tractorboy3 » Thu Aug 20, 2009 9:44 pm

Screwstick wrote:Tom, I was just about to send you a message to see if everything worked out with Earl, and looks like it did. The puller makes a world of difference when working on the Mag. Makes a hard job easy! Glad it worked out.


Thanks Ray...Tom :D
'50 H, '52 Super C, '54 Cub, '57 Cub, '58 Cub, '95 Cub Cadet 1440


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 6 guests