I am in need of the parts numbers for the thrust bearings for a Ross steering sector for a Cub Cadet 105.
Also if available a location to purchase the bearings.
Thanks
Eugene
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
105 Steering Sector Rebuild
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
- wdeturck
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
I don't know if this is the item you want. Retainer and ball Assy IH 389081-R91. I have the parts breakdown of the Ross steering and can E-mail you it. I have all the NF steerings. I would try Scott Madisons in WI(920-773-2661 e-mail madsons@ihcubcadet.com). If you can describe it he can find it.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Thank you
William:
Thank you for the part numbers. Parts purchased from the local Case IH dealer.
Total cost for the steering sector rebuild was $34.97. That was for the bearing cups, retainer/ball bearings and seal kit and retainer.
Eugene
Thank you for the part numbers. Parts purchased from the local Case IH dealer.
Total cost for the steering sector rebuild was $34.97. That was for the bearing cups, retainer/ball bearings and seal kit and retainer.
Eugene
Who is online
Users browsing this forum: No registered users and 5 guests