I plan to have road bands made for my 1934 F12 and 1944 H (both on steel). Does anyone have any photos of what they would recommend as a good design? I suppose they could be a single band around the lugs then clamped or welded to connect, or 4 sections of band each attached seperately to the lugs, a full width band or perhaps a 1/2 width band. I suspect once I put them on they will not be needed to be removed.
Any ideas or suggestions are welcome,
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Steel Wheel Road Bands
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Steel Wheel Road Bands
I would suggest bolting strips of old tire to them for traction loading and unloading. Smooth steel is mighty slick with even the slightest hint of moisture.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Steel Wheel Road Bands
Following in EJPs advise, rubber belting would work too (I believe) Something from a quarry would probably work the best. I think it's always reinforced (nylon).
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 81
- Joined: Sat Feb 10, 2007 9:56 am
Re: Steel Wheel Road Bands
Thanks, iIfound a couple folks interested in making them and they too suggested I install "Amish rummer" on them, srj
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 5 guests