This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
crankshaft pulley notches
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 38
- Joined: Fri Dec 09, 2005 11:43 pm
crankshaft pulley notches
Why does my crankshaft pulley have 2 notches on it? Which one do i use? The one with 1 notch or the one with 2 notches ? Is T.D.C. inbetween the two sets? It is on a farmall h and also an "m".
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Re: crankshaft pulley notches
The second notch to pass the pointer will be the TDC notch. The first notch will indicate the degrees of advance when the distributor advances. Static time to the second notch and confirm advance with a timing light using the first notch.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest